24AA512SC-I/S22K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24AA512SC-I/SN2K is an 8-pin chip that belongs to the 24AA5X2SC family, which is a series of CMOS Serial EEPROMs made by Microchip Technology. The 24AA512SC-I/SN2K is designed to provide high-reliability and cost-effectiveness data storage, with a wide range of applications.

Due to its small footprint, EEPROMs are usually found in applications such as embedded systems, instrumentation, consumer electronics, medical devices and consumer products. Employing CMOS technology and the I2C protocol, the 24AA512SC-I/SN2K is capable of storing up to 512K bits of data. The data can be programmed, erased and read back at a rate of up to 400 kbit/s.

The 24AA512SC-I/SN2K offers a number of features that make it suitable for a variety of applications. These include high-speed communication, low standby current, bi-directional data transfer, and endurance data retention of over 10 years. The chip also features a chip enable/disable pin, two hardware address pins, a device select pin, and a hardware write protect pin.

In addition, the 24AA512SC-I/SN2K provides several protection measures to ensure data integrity. These measures include password protection and a write protect pin. The device also features Cyclic Redundancy Checking (CRC) and Parity Checking for higher levels of data security.

In terms of working principles, the 24AA512SC-I/SN2K utilizes the I2C protocol. I2C is a two-wire serial bus protocol that allows communication between multiple devices. Each device is assigned an address, and data is transmitted serially between the devices. A cable carrying three wires - SDA, SCL, and GND connects the devices in a master-slave configuration.

The 24AA512SC-I/SN2K is programmed and erased using the I2C protocol. The device requires a start, stop, and address byte sequence to initiate data transmission. The address byte sequence is sent out before each read or write operation and consists of the slave address and the memory address. When the correct address is received, the device responds by sending an acknowledgement byte. After the address byte sequence, write data is sent in 8-bit chunks and read data is sent in 8-bit chunks.

When programming and erasing, the 24AA512SC-I/SN2K also employs a process called Bulk Erase. Bulk Erase enables the erasing of all bits in the register in a single write operation. Write and erase operations can also be performed using the Page Write and Page Erase commands.

The 24AA512SC-I/SN2K is widely used for applications such as industrial automation, medical devices, home automation, automotive, and consumer electronics. The chip\'s ability to store data securely and quickly make it a go-to choice for embedded systems and devices that need reliable, low-cost data storage.

The specific data is subject to PDF, and the above content is for reference