24AA64T-E/MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24AA64T-E/MS is a 64Kb I²C-compatible memory device commonly used in a wide range of embedded systems. This section of the article will explain how this integrated circuit works and some of its more common applications.

Description

The 24AA64T-E/MS is a 64Kb Serial EEPROM device using Two-Wire Bus protocol. It is capable of clock speeds up to 1MHz and supports both standard (100kHz) and fast (400kHz) speed modes, depending on the system\'s needs. Its memory is organized into an 8Kb Non-Volatile RAM (NVRAM) and a 56Kb EEPROM block. It features 8-byte page write and 256-byte page write capabilities. It also features I²C address encoding allowing up to 32 on-board memory devices to work together in a single system.

Applications

The 24AA64T-E/MS is most commonly used as a data storage device. It can be used as a boot ROM, a basic program memory, a system configuration memory, an interrupt controller, and an instruction decoder. It has also been used in automotive systems as a crash diagnostic data recorder and as a vehicle communication interface. The device\'s ability to store and update data in real-time makes it an ideal choice for embedded systems that require frequent data updates. For example, it can be used to store measurement settings and calibration parameters in a medical imaging system.

Working Principle

The 24AA64T-E/MS utilizes the I²C Bus protocol to communicate with other devices. The protocol is a two-wire bus which consists of a data line (SDA) and a clock line (SCL) which are used to send and receive data respectively. The protocol\'s addressing system allows up to 32 devices to be connected to the same bus. The device uses a random-access memory (RAM) and a non-volatile memory to store data. Data can be stored in either the RAM or the EEPROM block. The EEPROM block has a limited write life of 1 million cycles and can store data in 8-byte pages.

The 24AA64T-E/MS is capable of both sequential and random data access and can transmit data up to 1MHz. It supports both standard (100kHz) and fast (400kHz) speed modes which can be selected by a hardware pin. The device also features three user-programmable pins which can be used to select the device\'s I²C address and a bus acknowledge (ACK) pin which can be used to detect the successful transmission of data.

Conclusion

The 24AA64T-E/MS is a 64Kb integrated circuit which is commonly used in embedded systems due to its wide range of features and convenience. Its features include an 8Kb RAM, a 56Kb EEPROM block, an I²C Bus protocol, and 1MHz transfer rate. Its capabilities include data storage, real-time data update, and random and sequential data access. Its uses include automotive crash diagnostics, medical imaging, and system configuration storage. Its features and capabilities make it an ideal choice for embedded systems.

The specific data is subject to PDF, and the above content is for reference