2500-36G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components with minor, predictable changes in resistance due to varying current levels or voltage. They are commonly used in power supplies, in most electronics applications as well as in wireless applications. Fixed inductors are available in various sizes, shapes and materials. Generally, they are made up of wires wrapped around a ferromagnetic core, such as iron, which extends its magnetic field outside. Inside the core is an inner conductor which normally consists of a coil of insulated copper wire which is insulated from the core.

2500-36G application field and working principle is explained below. 2500-36G inductors are employed for radio frequency (RF) frequency control applications and for AC filters or RF filters. In these applications, they are used to provide a constant inductance over a wide range of frequencies and a wide range of temperatures. They can also be used to control the level of harmonic distortion of an AC or RF signal.

The working principle of a fixed inductor is based on Faraday\'s law, which states that an induced electromotive force (EMF) is produced in a closed circuit as a result of a changing magnetic flux. The induced EMF is proportional to the change in the flux per unit time. As the current in the coil increases, the magnetic flux around the coil grows, producing an induced EMF and resistance in the circuit.

At high frequencies, the EMF induced can exceed the applied voltage, providing a zero-frequency feedback state which allows the inductor to maintain a constant inductance over a broad range of frequencies and temperatures. This is why fixed inductors are very useful in the frequency control applications and AC and RF filters.

The frequency and temperature range for 2500-36G inductors is 10 kHz to 2 MHz, -20 to 85 °C, respectively. They are commonly used for RF and shortwave radio frequencies. At this frequency range, the inductor’s impedance is very low and the impedance rise due to temperature is minimal. Therefore, these inductors are suitable for use in high frequency applications.

As previously mentioned, 2500-36G inductors are mainly used for radio frequency and shortwave radio frequency applications such as filters, amplifiers and antennas. They can also be used in power supplies, surge protection circuits, and high current circuits. This type of inductor is also suitable for use in audio and telecommunications applications such as baseband transmission.

Due to its very low resistance, 2500-36G inductors can also be used in amplifiers, oscillators, and audio circuits with minimal noise generation. Additionally, they are ideal for use in high voltage power supplies and battery-powered applications. As far as size is concerned, 2500-36G inductors are 0.425 inches high, 0.415 inches wide and 0.75 inches thick. Due to their small size and low DC resistance, 2500-36G inductors are a great choice for many electronics applications.

In conclusion, fixed inductors like 2500-36G are important components of many electronic systems. They are used to provide a constant inductance over a wide range of frequencies and temperatures. Because of their small size, they are suitable for many high frequency and power supply applications. Therefore, they are an important component of many power supplies and radio frequency applications.

The specific data is subject to PDF, and the above content is for reference