250375-4Z50-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators

Attenuators are components designed to reduce the power or magnitude of a signal without appreciably distorting its waveform. This is done to control the power sent to a certain device, or to compensate for other components in the system. Attenuators come in a variety of forms, including voltage dividers, resistive attenuators, absorptive/resistive attenuators, and electronic matched attenuators.

The 250375-4Z50-2 is a resistive attenuator, designed to be used in professional audio systems. It is a 2-way, 4 ohm, 50 W unit that is designed to provide a constant impedance matching. As such, it is ideal for use in applications where a constant voltage is required.

The 250375-4Z50-2 is designed with an open circuit, two-way system. This means that the resistance of the unit is divided between two terminals: the input terminal and the output terminal. This allows for a controlled attenuation of the signal level on the output. The resistance of the unit at the input and output terminals can be adjusted through the use of an impedance matching circuit. The impedance matching circuit is used to balance the levels of the input and output signals.

The working principle of the 250375-4Z50-2 is based on the principle of linear attenuation. This means that the amount of attenuation applied is proportional to the input level of the signal. This is done by using a resistive element between the two terminals. The resistance of the element is adjusted to achieve the desired level of attenuation. In order to achieve a constant impedance matching, the resistive element is placed in series between the two terminals. By doing this, the impedance of the unit is balanced between the input and output terminals.

The 250375-4Z50-2 is an ideal choice for applications such as PA systems, studio monitor systems, and broadcast systems. It is suitable for use in a range of applications and works well in environments where a constant voltage is required. The unit can handle up to 50W and is durability tested to ensure it can withstand the rigors of professional use. The unit is also designed to be easy to install and use.

In conclusion, the 250375-4Z50-2 is an ideal choice for applications where a constant voltage is required. Its easy installation and use make it an attractive solution for professional audio systems. Its open circuit design, coupled with the adjustable resistive element, enables it to attenuate the signal and provide a constant impedance matching. Its durability and performance make it perfect for use in a range of situations.

The specific data is subject to PDF, and the above content is for reference