2510R-96F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are also known as coil, chokes, or reactors, and are designed to provide a constant inductance for a wide variety of electrical engineering applications. 2510R-96F is a good example of a fixed inductor. This article will discuss the application field and working principle of the 2510R-96F.

Application Field
The 2510R-96F is typically used in automotive, lighting, industrial, communications, and consumer electronics applications. As a fixed inductor, it can be used to limit the current in an AC circuit or to filter out high frequency noise. It can also be used to provide a stable inductance in RF systems, such as radio receivers and transmitters.

Working Principle
The 2510R-96F is an inductor that works through the principles of inductance. When a time-varying current passes through it, the inductance of the 2510R-96F produces a back EMF (electromotive force) that opposes the change of the current. The amount of back EMF produced is proportional to the rate of change of the current. This induces a voltage in the coil and limits the current. At the same time, it can be used to filter out high frequency noise in the current.

The 2510R-96F is a fixed inductor that uses a ferrite core to increase inductance. The core is composed of an iron alloy with a steel frame. The core is then wrapped with several layers of insulated copper wire. The thicker the copper wire, the higher the inductance. The inductance also depends on the number of turns, the number of layers, the size of the core, and the air gap between the turns.

The 2510R-96F is designed to offer high inductance values with higher-temperature stability. It is available in packages ranging from 4.2 mm x 3.7 mm to 5.7 mm x 5.7 mm and offers high current carrying capacity, low heat generation, and excellent insulation (withstands up to 250V). Additionally, it complies with AEC-Q200 standards, which makes it suitable for automotive applications.

In conclusion, the 2510R-96F is a fixed inductor that is used in a wide variety of applications to limit the current in an AC circuit or to filter out high frequency noise. It has a ferrite core that increases its inductance, and it has a high current carrying capacity, low heat generation, and excellent insulation. It is available in various packages and is compliant with AEC-Q200 standards, making it an excellent choice for automotive applications.

The specific data is subject to PDF, and the above content is for reference