2512-332F

DC Resistance (DCR):	750 mOhm Max
Height - Seated (Max):	0.110" (2.79mm)
Size / Dimension:	0.255" L x 0.105" W (6.48mm x 2.67mm)
Supplier Device Package:	2-SMD
Package / Case:	2-SMD, J-Lead
Mounting Type:	Surface Mount
Inductance Frequency - Test:	7.9MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	2512
Shielding:	Unshielded
Current - Saturation:	551mA
Current Rating:	734mA
Tolerance:	±1%
Inductance:	3.3µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are a type of electrical component that helps protect circuits from damage caused by sudden changes in the current flowing through them. The 2512-332F Inductor is an example of this type of component, and its application field and working principle are outlined below.The 2512-332F is a fixed inductor typically used in power supplies and other electrical circuits. It is a surface mount component, meaning that it can be soldered directly onto the circuit board. It is designed to minimize the impact of high frequency transients during power surges or other transient events, providing protection from potentially damaging levels of current.The 2512-332F has a winding made of two coils of wire, which are placed right next to each other. The windings are wrapped around a magnetically permeable core, which helps to increase the inductance of the component. The windings are connected to two electrical terminals, and when current passes through the windings it causes the core material to be magnetically saturated. This saturation builds up a magnetic field around the component, and it is this magnetic field that causes the inductor to act as a resistance to sudden changes in current.The 2512-332F also comes in both vertical and horizontal orientations, allowing designers to choose the optimal orientation for their implemented design. The component also has a low DC resistance, which helps minimize power loss from the device. Lastly, the component is rated at a high temperature range of -55°C to +125°C, making it suitable for use in a wide range of applications.The 2512-332F’s working principle is as follows. When a sudden flow of current passes through the windings, the magnetic field around the component is disturbed. This disturbance causes the inductor to act as a resistance to the sudden changes in the current’s direction (often called the inductive reactance of the component). Thus, by slowing down the change in the current direction, the 2512-332F can prevent potential damage to the electrical circuit.The application field of the 2512-332F is vast, and it can be found in a range of electronic devices. It is commonly used in power supplies, power amplifiers, motor speed controllers, and voltage regulators. It is also used in audio equipment, such as power amplifiers, preamplifiers, and audio receivers. In addition, it is often used in DC circuits where a high current is expected, such as electric motors, solenoids, and braking systems.As can be seen, the 2512-332F is a versatile component that has a wide range of applications and working principles. Its low DC resistance and high temperature range make it an ideal solution for many electrical designs, and its ability to protect circuits from sudden changes in current is invaluable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description