Allicdata Part #: | CCM2120-ND |
Manufacturer Part#: |
25FCD10 |
Price: | $ 194.27 |
Product Category: | Filters |
Manufacturer: | TE Connectivity Corcom Filters |
Short Description: | LINE FILTER 25A CHASSIS MOUNT |
More Detail: | N/A |
DataSheet: | 25FCD10 Datasheet/PDF |
Quantity: | 3 |
1 +: | $ 176.61400 |
10 +: | $ 170.72400 |
25 +: | $ 164.83700 |
Series: | FCD |
Part Status: | Active |
Filter Type: | Three Phase (Delta) |
Configuration: | Two Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | -- |
Voltage - Rated AC (Phase to Ground/Neutral): | 277V |
Voltage - Rated AC (Phase to Phase): | 480V |
Current: | 25A |
Frequency - Operating: | 50/60Hz |
Applications: | Regenerative Motor Drive |
Approvals: | UR |
Operating Temperature: | -10°C ~ 40°C |
Mounting Type: | Chassis Mount |
Termination Style: | Terminal Block |
Inductance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power line filter modules are an essential part of any electronic or electrical system. The 25FCD10 is one such module that is used for power line filtering and noise reduction applications. This module is highly effective and has successfully found its place in various powerful and dynamic applications.
The 25FCD10 consists of multiple coils and capacitors. It is made up of 10 turns, which are connected in series to achieve a total inductance of 10 mH. The two series coils are connected to opposite terminals of the power line, allowing the filter to reduce higher-frequency noise from the power line. The capacitance of the module is 870pF. This helps the filter to reduce EMI and RFI noise between resistive and capacitive loads. In this way, it plays an important role in ensuring that the power line is free of any noise.
In order to ensure proper functioning, it is important to install the filter correctly. The filter should be connected between the live and neutral power lines. It is important that the capacitor leads should be connected properly to the coils terminals as this will avoid short circuit of the filter. In the absence of a filter, EMI and RFI noise can disturb the working of the electronic system and can even damage sensitive components.
The filter should be grounded properly. The ground connection for the 25FCD10 should be connected at the center of the filter, which is marked with a \'G\' terminal. The connection should be made securely so as to guarantee efficient working of the filter. The ground connection should be made to the system ground and should also be made at the component level.
The 25FCD10 can be used in a wide range of applications. It can be used in low voltage applications such as in computers, automotive systems, medical equipment and telecommunications systems. It can be used to reduce noise and interference and therefore can be used in radio frequency applications as well. In addition to this, it can also be used in high-voltage and current applications such as in medical imaging equipment and in industrial automated systems.
The 25FCD10 is highly effective and efficient. It is capable of reducing noise levels to a large extent. It is also compatible with a wide range of products and systems and can be used in various applications. This makes it one of the most effective filter modules available and its use is highly recommended in electronic and electrical systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
25FCD10 | TE Connectiv... | 194.27 $ | 3 | LINE FILTER 25A CHASSIS M... |
AT28C040-25FC | Microchip Te... | 0.0 $ | 1000 | IC EEPROM 4M PARALLEL 32F... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT