2704-2-00-50-00-00-07-0

Flange Diameter:	0.156" (3.96mm)
Insulation Color:	--
Material - Insulation:	--
Insulation:	Non-Insulated
Contact Finish Thickness:	300.0µin (7.62µm)
Contact Finish:	Tin-Lead
Contact Material:	Brass Alloy
Board Thickness:	0.062" (1.57mm)
Mounting Hole Diameter:	0.082" (2.08mm)
Staking Side ID:	0.055" (1.40mm)
Staking Side OD:	0.078" (1.98mm)
Diameter - Turret Head:	0.109" (2.77mm)
Series:	2704
Termination:	Swage
Mounting Type:	Through Hole
Length - Overall:	0.433" (11.00mm)
Length - Below Flange:	0.105" (2.67mm)
Length - Above Board:	0.328" (8.33mm)
Number of Turrets:	Double
Moisture Sensitivity Level (MSL):	--
Terminal Type:	Single End
Lead Free Status / RoHS Status:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Turret connectors are a type of electrical connector that is used to join two circuits together. They are most commonly used in industrial applications, but they can also be used in domestic settings. Turret connectors are designed to provide a secure connection between a terminal and a busbar. In its simplest form, the turret connector consists of two plates which are riveted together to form a turret.The turret connector is designed to provide a reliable electrical connection between a mounted electronic device and a busbar. The terminal end of the turret connector is where the wires are connected. This area of the connector is sometimes referred to as the riser. 7.9mm turrets are typically used when connecting circuits with 7.9mm wires. The 2704-2-00-50-00-00-07-0 application field and working principle is designed to facilitate the connection between the two components of a circuit. It consists of two main components: the terminal and the busbar. The terminal end of the connector is fixed to the component or circuit board that need to be connected. The busbar is soldered onto the turret connector\'s riser. When the busbar is plugged into the turret connector, it forms an electrical connection between the two components. The turret connector can be used to connect both low-voltage and high-voltage components.The 2704-2-00-50-00-00-07-0 application field and working principle is designed to ensure a secure connection between two components. It is constructed out of brass or bronze, which helps to increase its durability and reduce the risk of corrosion. The riser is made of a plastic material and is designed to be flexible and resistant to high temperatures. The terminal and busbar are surrounded by insulation to protect them from any potential damage.The turret connector is designed to connect two components that require electrical power. The connection between the two components must be secure and reliable. The 2704-2-00-50-00-00-07-0 application field and working principle uses a secure attaching method which ensures that the connection between the two components is the same as when it was installed. This ensures that the electrical power is reliable and there are no discrepancies in the power distribution.The turret connector is often used in electrical applications such as computer systems, communication systems, and automotive industries. It is typically used to connect two circuits or two components together. For example, it can be used to connect a CPU to a memory card, or a network card to a monitor. It is also used to connect two sets of wires together such as a ground wire to the chassis of a car.The 2704-2-00-50-00-00-07-0 application field and working principle is a reliable design which has been designed for use in many types of electrical applications. It provides a secure connection between two components and ensures that the electrical power is reliable and accurate. The turret connector is a cost effective solution which is easy to install and has a long lifespan.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description