27931

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas sensors are used to detect and measure the concentrations of various gases in a given environment. The most common type of gas sensor is the 27931 gas sensor, which uses a high-impedance internal element as a sensing element. This gas sensor is commonly used in HVAC systems, industrial safety applications, and in medical and automotive applications.

The 27931 gas sensor is based on a novel sensing technology which is called thermal diffused layer technology (TDL). This technology changes the impedance of the internal sensing elements in response to changes in the gas concentration. The internal sensing element is composed of an isolator layer, a diffusion layer, a ceramic substrate, and a resistor layer. All of these components are connected in series and are encapsulated in a stainless steel housing.

When an electric current flows through the sensing element, a thermal gradient is created in the Diffusion Layer. The thermal gradient causes the diffusion of oxygen atoms, protons, and free electrons. These diffused particles change the resistance of the resistor layer, which in turn changes the total impedance of the sensing element.

The response time of the 27931 gas sensor is highly dependent on the nature of the gas being monitored. In general, the response time is longer for gases with larger water vapor content, such as carbon dioxide, ammonia, and ethylene oxide. The response time of the 27931 gas sensor is approximately 3-30 seconds depending on the gas concentration.

The 27931 gas sensor also has a narrow detection range, which is generally limited to a concentration range of 0.5 – 3.0%. This narrow range of detection means that the sensor must be used in combination with other gas sensing systems to achieve an accurate measure of the gas concentration.

The sensitivity of the 27931 gas sensor can be varied by changing the temperature of the diffusion layer. A higher temperature of the diffusion layer increases the sensitivity of the sensor while a lower temperature decreases the sensitivity of the sensor. Thus, depending on the application, the sensitivity of the sensor has to be adjusted to optimize performance.

In addition to its temperature sensitivity, the 27931 gas sensor is also highly sensitive to vibration. If the vibration is too intense (over 0.3G), then the accuracy of the readings may be compromised. Thus, it is important to minimize the vibration levels in the environment where the 27931 gas sensor is located.

The 27931 gas sensor is a highly reliable and accurate gas sensor that can be used in various applications. Its novel sensing technology, quick response time, and narrow detection range make it suitable for monitoring concentrations of various gases in different environments.

The specific data is subject to PDF, and the above content is for reference