2816-1-00-44-00-00-07-0 Connectors, Interconnects

Flange Diameter:	0.171" (4.34mm)
Insulation Color:	--
Material - Insulation:	--
Insulation:	Non-Insulated
Contact Finish Thickness:	300.0µin (7.62µm)
Contact Finish:	Silver
Contact Material:	Brass Alloy
Board Thickness:	0.031" (0.79mm)
Mounting Hole Diameter:	0.116" (2.95mm)
Staking Side ID:	0.083" (2.11mm)
Staking Side OD:	0.112" (2.84mm)
Diameter - Turret Head:	0.073" (1.85mm)
Series:	2816
Termination:	Swage
Mounting Type:	Through Hole
Length - Overall:	0.265" (6.73mm)
Length - Below Flange:	0.078" (1.98mm)
Length - Above Board:	0.187" (4.75mm)
Number of Turrets:	Single
Moisture Sensitivity Level (MSL):	--
Terminal Type:	Single End
Lead Free Status / RoHS Status:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminals - Turret Connectors

Turret Connectors, also called turret terminals, are used in electrical connection, which is able to meet the requirements of high-voltage and high-power occasions. One of the most typical models is 2816-1-00-44-00-00-07-0, whose application fields and working principle are discussed in this article.The 2816-1-00-44-00-00-07-0 is a highly reliable electrical connectionw solution, which supports round contact pin and screw fastener. It has wide application fields such as lightings, power, instrumentation, communication, consumer electronics, etc. This connector, with a rated current of 20A, is able to provide efficient connection and long-term stable operation in the case of 5kV high voltage and high power.The 2816-1-00-44-00-00-07-0 has a working principle of contact tunnel connection. Inside the terminal, there are contact points for a round contact pin and a screw fastener. The outer shell cover part of the contact point, while the inner contact tunnel connects the two contact points indoors. In the process of connection, the round contact pin and the fastener are tightened, and the contact tunnel connects two contact points. The contact tunnel presses onto the contact point along the whole length of contact route, so that they can form a closed loop and complete the connection.The 2816-1-00-44-00-00-07-0, with a contact resistance of ≤50mΩ, is typically used in occasions like lighting, power, instrumentation, communication and consumer electronics. Its widened contact surface is made with rust-proof and wear-resistant material, providing a long-term connection stability and reliable water and dustproof effect. In addition, it features 1~2.54mm pitch, a current rating of 20A and a voltage rating of 5kV.Moreover, the 2816-1-00-44-00-00-07-0 contains multiple safety features. It is designed to stick with the safety standard, meeting both UL and CSA standards. It has a low insulation resistance with a resistance value lower than 50mΩ. Its screw fastener is produced using high quality stainless steel, which promises a strong anti-corrosion performance. The installation of this connection solution is simple and economical, meeting a wide range of applications.In conclusion, 2816-1-00-44-00-00-07-0 is a type of motorized terminal connection solution with a rated current of 20A, a voltage rating of 5kV and a contact resistance lower than 50mΩ. It is widely used in lighting, power, instrumentation, communication and consumer electronics. It is designed to meet the safety standards of UL and CSA, and it additionally features a strong anti-corrosion performance and a simple installation process.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description