284TBCF503A26A1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

284TBCF503A26A1, or 28-mil Trimmer Potentiometer, is a type of rotary potentiometer (also known as a “trimpot”) that is primarily used in various electrical and electronic applications, such as audio equipment. The 28-mil refers to the size of its winged shaft, which has a diameter of 28 millimeters (1.102 inches). It also has a disk-shaped case with a 13-position switch (6 positions on one side and 7 positions on the other). In addition, it has three terminals, which are soldered on different parts of the case.

Rotary potentiometers are electronic components that are used to adjust the signal levels in various analog electronic devices and circuits. They usually consist of a rotatable spindle or a rotary shaft with three terminals. The resistance value of the potentiometer can be adjusted by rotating the spindle. In most cases, rotation of the spindle in one direction increases the resistance, while rotation in the other direction decreases the resistance.

In the case of 284TBCF503A26A1, the 28-mil trimmer potentiometer adjusts the output signal of the analog devices, such as amplifiers and radio receivers. Its three terminals are used for varying the resistance of the device by rotating the winged shaft. By rotating the winged shaft clockwise, the resistance value increases, while counter-clockwise rotation decreases it.

Rheostats are variable resistors that control the current flowing through a circuit. They are usually used in adjustable power supplies, to adjust the wattage of a lamp, to adjust the volume of stereo equipment, and to adjust the speed of a motor. Rheostats have two terminals, and the resistance between them can be changed by rotating the spindle of the device. Rotating the spindle one way increases the resistance, while rotating it the other way decreases the resistance.

Rheostats are different from potentiometers in that they do not have a center position or a wiper. In addition, they usually have larger power ratings than potentiometers, and they can be used to control larger currents. However, they are less accurate, and they cannot be used to accurately measure resistance values. Furthermore, they cannot be used to adjust signals in analog electronic devices.

In conclusion, 284TBCF503A26A1 is a type of rotary potentiometer, which is used to adjust the signal levels of analog devices. It has a winged shaft with three terminals, and its resistance can be adjusted by rotating the shaft. On the other hand, the rheostat is a variable resistor with two terminals, and the resistance between the terminals can be changed by rotating its spindle.

The specific data is subject to PDF, and the above content is for reference