28B0631-000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite cores are used in a variety of applications to pass electricity through various types of wiring. The 28B0631-000 ferrite core is an example of such a device. This particular type of ferrite core is used primarily for high frequency applications since it has a high impedance to signals in the 400 kHz to 40 MHz range. It can also be used for other applications, such as low voltage switching and electric motor control systems.

The 28B0631-000 ferrite core is designed to reduce the amount of electrical noise that can interfere with the operation of equipment or decrease the accuracy of measurements. This type of ferrite core is constructed of a powdered iron core wrapped in multiple layers of an insulating material. This increases the impedance of the ferrite core, which limits the amount of EMI (electromagnetic interference) that can travel through the wire. The higher impedance also means that high frequency signals will experience more signal loss along the way.

The 28B0631-000 ferrite core is typically installed around cables or wires that carry high frequencies. By using the core to direct and shield the signal, the EMI emitted by the cables and wires will be significantly reduced. This can help reduce the amount of EMI interference with other equipment and prevent signal distortion. Additionally, high frequency signals will travel more quickly and accurately along the route.

The 28B0631-000 ferrite core can be used with both shielded and unshielded wires. The core can be installed around the conductor or attached directly to the shielded wire. The insulated casing will still provide some EMI protection, but using a shielded cable will provide better overall noise suppression. The core is constructed from a high quality material and is extremely durable even in tough conditions.

The 28B0631-000 ferrite core also has a number of other applications. It can be used as an RF filter in high frequency systems and can also be used as a choke to reduce the amount of voltage transients. Additionally, the core can be used to suppress noise in low voltage motors, keeping them operating optimally with minimal noise.

The 28B0631-000 ferrite core is a versatile device that is used in a number of applications to reduce the amount of electrical noise emitted from cables. It works by providing a high impedance along the length of the cable, which limits the amount of EMI that is generated. This ensures that high frequency signals travel accurately along the route and that EMI interference is kept to a minimum. The core can be used with both shielded and unshielded cables, and its durable construction makes it an excellent choice for many different applications.

The specific data is subject to PDF, and the above content is for reference