Allicdata Part #: | 28SSA473MKF20N-ND |
Manufacturer Part#: |
28SSA473MKF20N |
Price: | $ 2.15 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | POT 47K OHM 0.4W CARBON LINEAR |
More Detail: | 47k Ohm 1 Gang Linear Through Hole Potentiometer N... |
DataSheet: | 28SSA473MKF20N Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
600 +: | $ 1.95514 |
Temperature Coefficient: | 5% |
Mounting Type: | Through Hole |
Bushing Thread: | 3/8 |
Actuator Diameter: | 0.250" (6.35mm) |
Actuator Length: | 0.787" (20.00mm) |
Actuator Type: | Flatted |
Termination Style: | PC Pins |
Resistive Material: | Carbon |
Adjustment Type: | Side Adjustment |
Rotation: | 300° |
Number of Turns: | 1 |
Series: | 23, Citec |
Power (Watts): | 0.4W |
Built in Switch: | None |
Number of Gangs: | 1 |
Tolerance: | ±20% |
Resistance (Ohms): | 47k |
Taper: | Linear |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Rotary Potentiometers and Rheostats are electrical components which vary or adjust the resistance in a circuit, by either limiting the current flow or acting as a voltage divider. The 28SSA473MKF20N is a type of Rotary Potentiometer which is made up of four primary components: the rotor, which is the central rotating part; the flat terminal, which is used to form the electrical contact with the track mounted on the base; the housing, which contains the rotor and flat terminal and the spring-loaded contacts; and the support membrane, which closes off one end of the housing and is attached to the base of the component.
The connection between the rotor and flat terminal runs along the curved track of the component, which works as a variable resistor. As the rotor moves along the track, the contact point between the rotor and flat terminal also moves – altering the resistance between the two at any given time. This variable resistance is the key to the 28SSA473MKF20N\'s application field and working principle.
Depending on the application, the 28SSA473MKF20N can be used as either a variable resistance for controlling the current flow, or as a voltage divider for measuring voltage levels. When used as a variable resistor, the 28SSA473MKF20N is connected in series with the load, directly across the voltage supply. As the rotor is rotated, the resistance it creates between the output and ground pins will vary – this allows the device to adjust the current flowing through the circuit and control the amount of power delivered to the load. Alternatively, if the 28SSA473MKF20N is used as a voltage divider, the output and ground pins are connected to a voltage source. Instead of controlling the current flow, this connection adjusts the voltage level measured at the output. The resistance between the two points will alter, as the rotor is rotated, and the output voltage will be divided by the resistance ratio, creating a constant voltage level.
The actual working principle of the 28SSA473MKF20N is based on the fact that the resistance value of the component is proportional to the angle of rotation of the rotor. The sensor is designed in such a way that the resistance between two points changes regularly as the rotor is rotated – this changes the current that flows through the circuit, or the voltage level measured at the output. This simple design makes the 28SSA473MKF20N a reliable and versatile component.
In conclusion, the 28SSA473MKF20N is a type of Rotary Potentiometer which is used in many applications due to its versatile working principle and ability to accurately measure and control current, and voltage levels. The connection between the rotor and flat terminal runs along the curved track of the component, which works as a variable resistor – altering the resistance between the two at any given time – and is the key to the device\'s application field and working principle. The 28SSA473MKF20N is a reliable and useful electrical component for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
28SSA473MKF20N | TE Connectiv... | 2.15 $ | 1000 | POT 47K OHM 0.4W CARBON L... |
MTV1-28SS-03 | ITT Cannon, ... | 94.76 $ | 1000 | MICRO28 Position Rectangu... |
MIR-28SS-ESD | Omron Automa... | 376.4 $ | 1000 | MIRROR SS 28 INCH LOW ESD |
MIRW-28SS | Omron Automa... | 408.21 $ | 1000 | MIRROR STAINLESS STEEL 28... |
CY3211-28SSOP | Cypress Semi... | 44.63 $ | 1000 | KIT FLEX POD FOR CY8C29X ... |
CY3212-28SSOP | Cypress Semi... | 0.0 $ | 1000 | KIT FLEX POD FOR CY8C21X ... |
CY3230-28SSOP-AK | Cypress Semi... | 0.0 $ | 1000 | KIT FOOT FOR 28-SSOP |
CY3656-28SSOP | Cypress Semi... | 0.0 $ | 1000 | KIT FLEX POD CY7C60323-PV... |
CY3664-28SSOP | Cypress Semi... | 0.0 $ | 1000 | FLEX POD FOR CY7C64215-28... |
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...