2952776101

Series:	--
Part Status:	Active
Filter Type:	--
Number of Lines:	3
Current Rating (Max):	--
DC Resistance (DCR) (Max):	--
Ratings:	--
Operating Temperature:	-55°C ~ 125°C
Package / Case:	6-THD
Mounting Type:	Through Hole
Height (Max):	0.465" (11.80mm)
Size / Dimension:	0.315" L x 0.299" W (8.00mm x 7.60mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips can be used for a variety of tasks, from high-frequency noise suppression to power supply filtering to data line radio frequency interference (RFI) shielding and more. In general, ferrite chips are a type of ceramic material that dissipates energy as heat. Ferrite beads are small, donut-shaped pieces that can be plugged directly into circuit boards to provide a high-inductance shield against different forms of interference, including power supply noise, high-frequency interference, and radio frequency interference (RFI) noise.The 2952776101 ferrite chip works by creating a small gap of low impedance within the device that is used to suppress electric and radio frequency interference (RFI) noise. The 2952776101 ferrite chip has a wide range of applications, from communications, computing, and consumer electronics to medical and automotive. It is an ideal choice for eliminating undesirable high-frequency noise and interference.The 2952776101 ferrite chip offers excellent RFI shielding capability because it is constructed using a soft magnetic material with a high resistance to high-frequency signals. The ferrite chip is designed to filter out unwanted noise and interference while allowing desired signals to pass through unaffected. It is highly resistant to transient and continuous RFI signals in the range from 30MHz to 1000MHz. The 2952776101 ferrite chip can be used in both RF and non-RF applications.When purchasing ferrite beads and chips, it is important to consider the application and type of functionality desired. For applications requiring RFI shielding, the 2952776101 ferrite chip is a great choice since it offers a high level of shielding. For power supply filtering, the ferrite chip\'s low inductance gap minimizes the number of unwanted noise frequencies. In communications applications, the 2952776101 ferrite chip can also be used to reduce crosstalk in both digital and analog signal lines.To use a ferrite chip correctly for RFI shielding, it should be placed between the transmitter and receiver of an electronic signal. This will reduce the amount of RFI energy generated by the transmitter coupled into the receiver. The 2952776101 ferrite chip achieves this by creating a low impedance gap that allows the desired signal to pass through while blocking out unwanted frequencies.To obtain optimal protection from RFI interference, 2952776101 ferrite chips should be placed at both the transmitter and receiver ends of the system. This is to ensure uninterrupted signal flow with minimal noise, and to minimize potential crosstalk. Additionally, 2952776101 ferrite chips should be placed near the antenna if it is connected directly to the transmitter or receiver.It is important to note that the 2952776101 ferrite chip should be installed in close proximity to devices that generate EMI noise. This is because the ferrite chip\'s effectiveness is dependent on its close proximity to the source of the noise. To maximize the effectiveness of the ferrite chip, it is advisable to place it near the RF cables connecting the device to the antenna.Overall, the 2952776101 ferrite chip is a versatile tool that can be used to reduce the effects of RFI noise and interference in both RF and non-RF applications. Its outstanding performance in data line RFI shielding as well as power supply filtering ensure that it is a great choice for any system requiring high-quality noise suppression.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description