Allicdata Part #: | CCM2290-ND |
Manufacturer Part#: |
2EK1 |
Price: | $ 14.16 |
Product Category: | Filters |
Manufacturer: | TE Connectivity Corcom Filters |
Short Description: | LINE FILTER 250VAC 2A CHASS MNT |
More Detail: | N/A |
DataSheet: | 2EK1 Datasheet/PDF |
Quantity: | 36 |
1 +: | $ 12.87720 |
10 +: | $ 11.95930 |
25 +: | $ 10.11950 |
50 +: | $ 9.81288 |
100 +: | $ 9.19961 |
250 +: | $ 8.27960 |
500 +: | $ 7.97300 |
Series: | K |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 250V |
Current: | 2A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Operating Temperature: | -10°C ~ 40°C |
Mounting Type: | Chassis Mount |
Termination Style: | Quick Connect |
Inductance: | 539µH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
2EK1 application field and working principle
2EK1 power line filter modules are used to protect electric and electronic circuits located near power sources from disturbances and interference caused by the power line. Such disturbances may include spikes, transients, and harmonics or noise generated by other circuits.
2EK1 power line filters are manufactured based on proven circuit topologies, materials, and components, and can achieve superior performance in many types of applications. The most common application of a 2EK1 power line filter is for audio equipment as these types of devices experience very high levels of distortion and noise due to the power line.
2EK1 power line filters consist of two primary components: an inductor-capacitor (LC) network and a grounded metal enclosure. The inductor-capacitor network of the 2EK1 filter module is designed to reduce interference from external sources. This is achieved by creating a low-impedance path for the frequencies of interest and a high impedance path for all other frequencies. This allows the circuit to act as a kind of low-pass filter, allowing only those frequencies which are necessary for proper operation to pass, while blocking out noise and interference.
The grounded metal enclosure of the filter module provides additional protection from interference by shielding the inductor-capacitor network. The enclosure is manufactured from a conductive metal and is typically designed to be effective up to a range of 10 – 25 MHz, and is typically rated up to 500 V. Furthermore, the housing also provides additional protection from the environment, as it offers protection from dust, moisture, and other contaminants.
In addition to filtering, the 2EK1 power line filter can also be used for voltage and current surge protection. The inductor-capacitor network can be used to limit the level of current or voltage entering a circuit by establishing a voltage or current limit at the input end of the filter module. This can effectively protect the circuit from spikes and transients caused by power outages or other sources of interference.
In conclusion, 2EK1 power line filter modules are designed to protect electric and electronic circuits located near power sources from disturbances and interference caused by the power line. These modules typically consist of an inductor-capacitor network and a grounded metal enclosure, and can be used for both filtering and surge protection. They are used in many types of applications, but are especially useful for audio equipment where high levels of distortion and noise can be present.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
2EK1 | TE Connectiv... | 14.16 $ | 36 | LINE FILTER 250VAC 2A CHA... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT