2FA1-NZSJ-C01-0

Series:	--
Packaging:	Tray
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Connector Style:	SMB, Fakra
Connector Type:	Jack, Female Socket
Contact Termination:	Crimp
Shield Termination:	Crimp
Impedance:	50 Ohm
Mounting Type:	Free Hanging (In-Line)
Mounting Feature:	--
Cable Group:	RG-174, 188, 188A, 316, LMR-100, M17/119-RG174
Fastening Type:	Latch Lock
Frequency - Max:	6GHz
Number of Ports:	1
Features:	Code Z
Housing Color:	Blue, Water
Ingress Protection:	--
Includes:	3 pcs - 1 Connector, 1 Contact, 1 Ferrule
Body Material:	Zinc Die Cast
Body Finish:	Nickel
Center Contact Plating:	Gold
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Operating Temperature:	-40°C ~ 100°C
Center Contact Material:	Phosphor Bronze
Mating Cycles:	100
Insertion Loss:	0.3dB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Coaxial connectors are a type of RF connector used in a variety of applications. They are common in television, radio, and satellite communication systems, and also in computers. Coaxial connectors have been around in the electronics world for more than 100 years. They are designed to provide a reliable connection by keeping impedance levels low. This ensures an efficient transfer of signals across different devices.The RF component part code for the 2FA1-NZSJ-C01-0 consists of the following:2FA1 - This is the impedance of the connector, which is 50 ohms.NZSJ - This is the size of the connector; N means that it is a Type N, which is a small coaxial connector.C01 - This is the type of contact used; C01 means that the contact is a male with a center pin.The specifications for this connector are: impedance: 50 ohms, voltage rating: 5V, frequency range: 0 - 6 GHz, and current rating: 1.3A.The 2FA1-NZSJ-C01-0 connector has a wide range of applications, from communications and data transmission to industrial and consumer electronics. It is most commonly used in wireless networks, such as Wi-Fi, GSM, Bluetooth, and LTE. It is also used in mobile phones and other handheld devices. It is also used in devices that require a low profile, such as remote sensing equipment, medical instruments, and test and measurement equipment.The working principle of the 2FA1-NZSJ-C01-0 connector is very simple. It has an outer conductor or dielectric, and an inner conductor. The outer conductor is made of either aluminum or copper, while the inner conductor is made of a conductive material such as copper or gold. The outer conductor acts as a shield against any interference from outside sources. It also helps to ensure that the signal stays within the connector to minimize losses. The inner conductor is responsible for transferring the signal from one device to the other.The 2FA1-NZSJ-C01-0 connector also features a unique locking mechanism. This locking mechanism ensures that the connector remains secure even under extreme conditions. It also helps to prevent the connector from being accidentally disconnected or from being pulled out from the device it is connected to.In conclusion, the 2FA1-NZSJ-C01-0 connector is an ideal choice for wireless networking, remote sensing equipment, medical instruments, and test and measurement equipment. Its simple design ensures a reliable connection and low impedance, while its unique locking mechanism ensures that it remains secure and does not come loose.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description