| Allicdata Part #: | 3-1-6JEL-ND |
| Manufacturer Part#: |
3-1-6JEL |
| Price: | $ 0.00 |
| Product Category: | RF/IF and RFID |
| Manufacturer: | Bourns Inc. |
| Short Description: | MAGNETICS RF TRANSFORMER |
| More Detail: | RF Balun 10kHz ~ 150MHz 6-SMD, J-Lead |
| DataSheet: |  3-1-6JEL Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Series: | -- |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Frequency Range: | 10kHz ~ 150MHz |
| Impedance - Unbalanced/Balanced: | -- |
| Phase Difference: | -- |
| Insertion Loss (Max): | 3.0dB |
| Return Loss (Min): | -- |
| Package / Case: | 6-SMD, J-Lead |
| Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Baluns are electrical devices that typically convert an unbalanced signal to a balanced one. Generally, a balun consists of two or more windings of copper wire wrapped around a common core of magnetic material. When a voltage is applied, a current is established in the windings, which generates a magnetic field. This field is then used to convert the voltage into a balanced signal.
The 3-1-6JEL application field is used to create a balanced signal from an unbalanced source when an unbalanced signal is required to operate or to provide an unbalanced signal from a balanced source when a balanced signal is required. This application field uses a special configuration of the windings and cores of the balun to tailor the magnetic field produced by the device. By adjusting the windings and cores of the balun to match the desired signal, the 3-1-6JEL application field can maximize the effectiveness of converting the signal.
When the windings of the 3-1-6JEL application field are correctly configured, the resulting magnetic field will be able to couple the desired signal from the unbalanced source to the balanced one. This is done by arranging the windings so that the current generated in the first winding induces a current in the second winding. This induces a current in the third winding, which creates the balanced signal.
The magnitude of the balanced signal is dependent on the configuration of the windings and cores in the 3-1-6JEL application field and the frequency of the signals being converted. The windings of the balun can be adjusted so that the balanced signal has a higher or lower voltage. Additionally, the cores of the balun can be adjusted to provide the desired frequency response of the balanced signal.
The working principle of the 3-1-6JEL application field is based on the use of a magnetic field to generate a balanced signal from an unbalanced source. When the windings and cores of the balun are correctly aligned, the resulting magnetic field will be able to couple the desired signal from the unbalanced source to the balanced one. This is done by arranging the windings so that the current generated in the first winding induces a current in the second winding. This induces a current in the third winding, which creates the balanced signal.
The 3-1-6JEL application field is an effective way to convert an unbalanced signal to a balanced one. By carefully adjusting the windings and cores of the balun, the desired frequency response and magnitude of the balanced signal can be achieved. This allows for the use of an unbalanced signal in applications requiring a balanced signal.
The specific data is subject to PDF, and the above content is for reference