3006P-1-103

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer potentiometers, or trimmers for short, are variable resistors or variable capacitors that mechanically adjust the amount of resistance in a circuit. They are commonly used to fine-tune radio, telephone and other electronic circuitry. The 3006P-1-103 trimmer potentiometer is a three-terminal variable resistor with its resistance adjustable depending on the user requirement.

The 3006P-1-103 trimmer consists of a conductive track mounted on an insulated body. At one end of the track is a metal contact called a slider or wiper. This contact is connected to one of the terminals on the trimmer, the adjustment terminal. The other two terminals are the input and output terminals. The resistance between the input and output terminals and the adjustment terminal changes with the position of the slider.

The most common use of trimmers is in the adjustment of circuit parameters, such as gain, cutoff frequency, and bias level. Trimmer potentiometers are used to set the sensitivity of voltage, current, or other parameters in a circuit. They are commonly used in audio and video electronics, such as amplifiers, equalizers, and receivers.

Another important use of trimmers is in phase-locked loop (PLL) circuits, in order to set the frequency and gain of the loop. They are used to set the cutoff frequency for control applications, such as stabilizers. In addition, trimmers are often used to adjust the operating characteristics of circuit elements, including transistors, diodes, and integrated circuits.

The 3006P-1-103 trimmer potentiometer is a three-terminal device and is available with a range of values. The wiper terminal is set to a mid-position between the ends of the track. This allows precise adjustment of the desired level of resistance. The track resistance and insulation between the contacts is often tailored to the application.

This trimmer is typically mounted on a PC board by a three- or four-pin arrangement. It can be mounted in any of several ways, like straight-through, right-angle, axial lead, plastic case, etc. The resistance can be adjusted manually with a screwdriver, or it can be adjusted remotely via a shaft. The resistance can be adjusted in both directions.

Trimmer potentiometers are widely used in telecommunications, consumer electronics, automotive electronics, and industrial applications. The 3006P-1-103 trimmer offers a high degree of accuracy and repeatability, making it suitable for precise adjustment of circuit parameters. It is also extremely rugged and reliable, making it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference