3059Y-1-500

Series:	Trimpot® 3059 - Sealed
Packaging:	Tube
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Resistance:	50 Ohms
Power (Watts):	1W
Tolerance:	±10%
Temperature Coefficient:	±100ppm/°C
Number of Turns:	22
Adjustment Type:	Side Adjustment
Resistive Material:	Cermet
Mounting Type:	Chassis Mount
Termination Style:	PC Pins
Size / Dimension:	Rectangular - 0.315" x 0.190" Face x 1.250" L (8.00mm x 4.83mm x 31.75mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers

Trimmer potentiometers, also known as trimpots or trimming potentiometers, are variable resistors with a knurled shaft that allow fine control of the resistance in electronics circuits. The most commonly used trimmer type is the 3059Y-1-500, which has three pins, a terminal shaft, and a plastic casing. This type of trimmer has several advantages over other types of resistors, including its small size and adjustable resistance.The 3059Y-1-500 trimmer potentiometer is typically used to adjust the resistance in electronic circuits in order to fine-tune the current or voltage passing through the circuit. It can also be used to adjust the gain of an amplifier. The adjustable resistance of the trimmer can be adjusted with a screwdriver or other small tools, and the resistance can be set to any value between its maximum and minimum limits. The small size of the trimmer makes it perfect for use in small spaces or on densely populated circuit boards.The 3059Y-1-500 trimmer is composed of a metal base, a ceramic wiper, and a conductive plastic wiper. The wiper is a thin metal sheet that interacts with the metal traces on the ceramic wiper. This allows the wiper to adjust its resistance as it moves along the resistor\'s length. The ceramic wiper is then coated with conductive plastic, allowing for smooth resistance changes.The 3059Y-1-500 is available in a range of resistances, from 100Ω to 500KΩ. The resistances are determined by the size of the resistor, as the smaller the resistor, the higher the resistance. The resistance can also be adjusted by rotating the shaft, which changes the capacitance between the two wipers, thus changing the resistance.In order to use the 3059Y-1-500 trimmer, it must first be inserted into a circuit in order for it to be connected to a voltage source. The trimmer is then adjusted using a screwdriver or other small tool, turning the shaft to increase or decrease the resistance. Once the desired resistance is reached, the current or voltage passing through the circuit should be adjusted accordingly.Trimmer potentiometers are used in a variety of electronic applications, including audio devices, industrial equipment, and medical devices. They are used to ensure that the circuit is correctly tuned for a particular application, and for fine-tuning the current or voltage passing through the circuit. The 3059Y-1-500 trimmer is ideal for use in small devices due to its small size and adjustable resistance, and is an essential component for a wide range of electronic designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description