30KPA102CE3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS – Diodes are surge-protection components that are used to protect sensitive electronic components from high-voltage electric transients. The 30KPA102CE3/TR13 is a bi-directional, high-speed thyristor (or silicon-controlled-rectifier) diode designed for a wide range of applications, including telecommunications and data processing. The device offers resistance to electrostatic discharge (ESD) up to 30kA on contact and 25kA on air discharge.

The 30KPA102CE3/TR13 is a TVS diode that reduces both the amplitude and duration of transients by clamping the voltage in the power supply line. It is also capable of blocking high-voltage spikes for operation up to 30V. It has a low-capacitance design that reduces the effects of high-frequency transients. As a result, it is ideal for protecting sensitive electronic components from ESD, induced spikes, and other transient voltages.

The 30KPA102CE3/TR13 can be used in many types of equipment and systems, from computers and consumer electronics to automotive and industrial applications. It is suitable for use in components that require protection against high-voltage surges, such as voltage regulators, power supplies, and circuit breakers. It can also be used in power-over-Ethernet (PoE) applications.

The 30KPA102CE3/TR13 works by using a voltage-dependent resistor (VDR) and a threshold voltage. When the voltage across the device exceeds the threshold, the VDR quickly switches to its active state, allowing current to pass through it and effectively limiting the voltage. The VDR then switches off after the voltage drops below the threshold.

The 30KPA102CE3/TR13 is designed with a reverse-standoff voltage of 30V. This means that the device can withstand higher reverse voltages, such as those caused by lightning strikes. The device is also rated for a higher temperature range than most TVS diodes, with its operating temperature range being -40°C to +125°C. In addition, the device has a low clamping ratio, which effectively limits the voltage during transient events.

The 30KPA102CE3/TR13 is a reliable and cost-effective solution for protecting sensitive electronic components from high-voltage transients. The device is designed to meet the high-speed requirements for data processing, telecommunications, and other applications. With its high-temperature range and low-capacitance design, the 30KPA102CE3/TR13 is an ideal choice for ESD protection, high-voltage protection, and other surge-protection applications.

The specific data is subject to PDF, and the above content is for reference