30KPA51C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS – Diodes: 30KPA51C Application Field and Working Principle

Transient Voltage Suppressor (TVS) diodes are electrical components used for protecting semiconductor components and circuits from high-energy voltage transients from external sources. They are also known as spike suppressors, surge suppressors, or transient arresters. They are typically used for overvoltage protection for short duration electrical surge events.

The 30KPA51C TVS diode belongs to a family of overvoltage protection devices, and is made up of two terminals with a non-linear junction. This TVS diode is surge protected, meaning that it can provide protection against high voltage spikes, such as those caused by lightning strikes. This particular device has a maximum clamping voltage of 30V, and a maximum working peak pulse current of 5A.

This type of diode is used in various applications, ranging from protection of small electronic components and integrated circuits from power surges to protection of signal lines from electromagnetic interference (EMI). 30KPA51C diodes are used for overvoltage and ESD protection, and they can be used in many industries, including automotive, computing, communications and medical. In addition, they are also used for protecting signal lines from EMI, and for protecting solar panels from lightning strikes.

The 30KPA51C TVS diode works by clamping high-energy transient voltage spikes to a safe voltage level, effectively reducing the output voltage of the protected system. This is done by its non-linear junction, which is tuned to (or polarized at) a predefined clamping voltage. When a voltage spike exceeds this preset clamping voltage, the non-linear junction acts as a resistive element, diverting the excess energy away from the protected electronics.

The device is connected in parallel across the power supply and load of the protected system. The spike or surge travels along the power or signal lines and enters the device at either the anode or the cathode, depending on the type of surge. When the voltage spike is detected, the device begins to behave like a resistor and the junction reaches the preset clamping voltage, effecti

The specific data is subject to PDF, and the above content is for reference