3119-1-00-34-00-00-08-0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

3119-1-00-34-00-00-08-0 terminals are a type of single post connectors, and find use in a wide variety of applications. They are typically used in electrical equipment, electronic circuits, and telecommunications, though they can widely be used in a whole host of other applications.

These terminals are wire-in terminals, so the cable is attached to the terminal with a wire-wrap connection. This design offers a strong mechanical and electrical connection point for the cable.

The connectors are made of highly conductive thermoplastic and are coated with a high-quality insulation to protect them from corrosion and mechanical wear. This coating prevents electric shorts that can occur in other types of connectors. These terminals also incorporate a strain relief insert that helps prevent movement of the wire and provides additional protection to the terminals.

The terminals feature either three or four contact points or "pins." This design allows for the connection of up to three or four wires in the same connector. The terminals can also be used for control and signal circuits, which requires fewer wires.

When it comes to the working principle of the 3119-1-00-34-00-00-08-0, these terminals use a simple wire wrap mechanism to connect the cable to the terminal. This simple mechanism provides a strong mechanical and electrical connection. The wire wrap works by taking the cable and wrapping it around the terminal post. The wire is tightly wrapped around the terminal post until any excess wire is removed and the coil is firmly in place. The wire is then tightened further by trimming off the excess wire with a pair of wire cutters.

The screw terminal also works similarly but with a added additional twist in the form of the screw. This screw is tightened down on the cable, which then tightens it onto the terminal post. The screw can be tightened with a screwdriver or with pliers if the screw is difficult to tighten by hand.

Once the cable is attached to the terminal post, the connector is secured into place. This is done either with a crimp tool or alternatively a soldering iron can be used to secure the cable to the contacts. The connector is then secured into place with screws or other fasteners.

The 3119-1-00-34-00-00-08-0 terminals are a versatile and reliable solution for a wide variety of applications. They offer a simple and reliable connection point for cables, and their design offers protection against electric shorts. They can be used for both control and signal circuits, and are a reliable and durable choice for electrical, electronic, and telecommunications applications.

The specific data is subject to PDF, and the above content is for reference