3260106

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks – Din Rail, Channel

Terminal blocks are widely used in industrial electronics in different applications. An example of such a device is ​the 3260106 a DIN rail-mounted terminal block with a channel on it that can accommodate up to 4mm2 of connection wire. The mounting of this device is made easy due to the white plastic housing that easily snaps onto a DIN rail. This device is primarily designed for use in industrial applications where a quick and reliable mode of connection and disconnection is required. Additionally, this device is suitable for both on-off applications and applications that require a temporarily connected power or signal.

The device houses 6 nominal poles with two feed-through terminals per each pole. The rocker-actuated connection point enables a quick and simple connection and disconnection with minimum effort. The terminals are made of brass and have a protection grade of IP20. The contact acceptance is suitable for 4 mm2 wires with a wire range of 0.14-2.5mm2. The insulated housing has a width of 40 mm and a height of 50mm and features a ventilated design that ensures additional safety in applications that work with high currents.

The 3260106 device also features protection against accidental contact due to its snap-in design that ensures the device is installed securely on the DIN rail. This makes it a great solution for applications that require connection and disconnection in order to provide flexibility while also preventing accidental contact with live electrical circuits. This device is also very easy to install due to its snap-on design and integrated support bracket.

In terms of the working principle, the 3260106 is designed for quick and easy connection/disconnection and is used mainly for on-off purposes. This means the user only needs to flip the rocker-actuated connection point of the device in order to connect or disconnect the circuit. This connection point also has a detachable wiring bridge that is connected to the two feed-through terminals of each pole. As previously mentioned, this device can accept wire up to 4mm2 and the connection point features a retention clip that helps hold the wire securely in place.

In closing, the 3260106 is a great solution for industrial applications that require quick and easy connection and disconnection of electrical circuits. This device is designed for 4mm2 wires and features a ventilated design, a plastic housing, and a detachable wiring bridge that enables quick and simple connection/disconnection. The device also features a rocker-actuated connection point with a retention clip for an added level of safety.

The specific data is subject to PDF, and the above content is for reference