3287-4100-TD Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) are electrical components used to connect two coaxial cables in an electronic system. They are mainly used to electrically and physically connect cables for transmitting radio frequency (RF) signals.

The 3287-4100-TD is a coaxial connector typically used in telecommunications and satellite communication applications. It is designed for low to medium frequencies, including 500 MHz to 5.9 GHz, while still performing satisfactorily at higher frequencies. The 3287-4100-TD is composed of two rigid thermoplastic insulators with stamped and formed contacts. It is equipped with a trademarked T-type coupling for easy insertion and removal, as well as shielded 360-degree grounding contact to minimize interference.

The 3287-4100-TD is suitable for a wide range of applications, such as telecommunications, satellite communications, RF distribution, antenna systems, and military communications. With its robust design and high-reliability performance, it can reliably withstand mechanical stress, shock, and vibration.

The main components of a 3287-4100-TD connector are the male and female part, end sleeve, center contact, nut housing, and outer conductor. The male part consists of the center contact and an insulator shell, while the female part consists of the insulator shell, a center contact, and a spring sleeve. The center contacts of each piece are then inserted into the insulating shells. The outer conductor of the connector is then connected using a nut spring and housing. Finally, the end sleeve is slid onto the connector to provide shielding and provide stress relief.

The working principle of the 3287-4100-TD connector is based upon the fundamental principles of radio frequency (RF) communication. It creates an electrical and physical connection between two pieces of coaxial cable, enabling transmission of signals between them. The center contact of each pieces of the connector is attached to the ground conductor of the cable, while the outer conductor is connected to the signal conductor. This allows signals to be transmitted between two pieces of cable.

The 3287-4100-TD connector is a reliable and practical solution for many applications. It is designed to provide high-frequency transmission and excellent electrical performance, making it ideal for a wide range of applications. With its trademarked T-type coupling design and shielded 360-degree grounding contact, it can effectively reduce noise and interference and ensure reliable transmission of RF signals.

The specific data is subject to PDF, and the above content is for reference