3296Y-1-473

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Trimmer Potentiometers

A trimmer potentiometer, or trimpot, is a miniature adjustable potentiometer used for setting and adjusting circuit functions and parameters. Commonly used in electronic circuit design, electronics technicians use trimmer potentiometers for the calibration and adjustment of a wide variety of circuits and functions.

3296Y-1-473 Application Field and Working Principle

The 3296Y-1-473 Trimmer Potentiometer is a single-turn, center-tapped potentiometer with an adjustable resistance element. The resistance element consists of a ceramic substrate that is etched to form a spiral lamination and a conductive carbon layer on each side of the substrate. It is designed to provide greater resolution than a multi-turn trimpot (dependent upon the number of turns of the spindle) and can be used in both single- and multi-turn applications.

The 3296Y-1-473 trimpot is most commonly used in electrical and electronic circuit design, such as printed circuit boards (PCBs). It can be used to set and adjust circuit functions and parameters, such as voltage dividers, amplitude and frequency control circuits, bias networks, and dynamic filters. It is often used in precision applications as the preset variable resistance element in voltage divider circuits, due to its full range of adjustable settings. The resistor element also provides excellent temperature stability.

The 3296Y-1-473 trimpot is also very easy to use due to its simple working principle. The resistance element is adjusted by turning the spindle, which connects to a threaded shaft with a screw. When the screw is rotated, the nominal resistance changes. When the screw is completely tightened, the resistance is at its maximum. As the screw is turned, the resistance decreases until it reaches its minimum when the screw is completely loosened.

For normal operation, a 3296Y-1-473 trimpot should be mounted on a printed circuit board. The screws should be fastened with a suitable screwdriver, and the adjustment should be made by turning the clockwise or counterclockwise. If the adjustment is too large, the resistance element can be damaged if it is overloaded. It is important to make sure that the element is not overloaded.

Conclusion

The 3296Y-1-473 Trimmer Potentiometer is an ideal choice for setting and adjusting circuit functions and parameters in an accurate and reliable manner. Its simple working principle and adjustable resistance element make it easy to use and set up. It can be used in a variety of applications, including voltage dividers, amplitude and frequency control circuits, bias networks, and dynamic filters. The 3296Y-1-473 trimpot is a very useful and reliable tool for adjusting and calibrating circuits and functions in electronic and electrical circuit design.

The specific data is subject to PDF, and the above content is for reference