Allicdata Part #: | 1868-1177-ND |
Manufacturer Part#: |
32AS102-K06S3 |
Price: | $ 91.76 |
Product Category: | RF/IF and RFID |
Manufacturer: | Rosenberger |
Short Description: | ATTENUATOR SMA JACK/PLUG |
More Detail: | RF Attenuator 6dB 0Hz ~ 18GHz 50 Ohms 2W SMA In-L... |
DataSheet: | 32AS102-K06S3 Datasheet/PDF |
Quantity: | 10 |
1 +: | $ 83.41830 |
10 +: | $ 78.51340 |
25 +: | $ 76.05990 |
50 +: | $ 71.15290 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 6dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are passive devices designed to reduce the amplitude of an electrical signal. They can be used to reduce the signal power reached to a receiver without distorting its waveform. They are widely used in electronic circuits for reducing gain, eliminating overshoot or preventing saturation of active stages.
The 32AS102-K06S3 is a 3 dB pad attenuator that is designed to reduce the amplitude of a high frequency signal. This device is usually used as an impedance matching network to reduce the amplitude of a high frequency signal and protect the receiver from the high voltage signals. It is made with high quality materials which gives it wide applications in high frequency circuits. The attenuator has an impedance of 50 ohm and can handle a maximum power of 5 watts.
The working principle of the 32AS102-K06S3 is simple. When a high frequency signal is applied to the input terminals, it experiences an impedance mismatch due to the difference between the impedance of the signal source and the attenuator. This mismatch produces a voltage drop that reduces the amplitude of the high frequency signal. The output of the attenuator is then much lower in amplitude as compared to the input.
The 32AS102-K06S3 attenuator is widely used in RF and microwave circuits where signals are at very high frequencies. It can be used in military communications systems, radar systems, and cellular base stations. It can also be used in broadcasting, satellite, and telecommunication systems. In all these systems, the attenuator is used to reduce the amplitude of the signal so as to prevent the receiver from getting overloaded.
The 32AS102-K06S3 attenuator is a simple yet effective device that is used to reduce the amplitude of a high frequency signal without affecting its waveform. It is able to reduce the signal power to tolerable levels without distorting the waveform, and is thus widely used in a variety of RF and microwave applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
32AS102-K06S3 | Rosenberger | 91.76 $ | 10 | ATTENUATOR SMA JACK/PLUGR... |
32AS102-K03S3 | Rosenberger | 91.76 $ | 5 | ATTENUATOR SMA JACK/PLUGR... |
32AS102-K10S3 | Rosenberger | 91.76 $ | 5 | ATTENUATOR SMA JACK/PLUGR... |
32AS102-K40S3 | Rosenberger | 141.25 $ | 1000 | SMA ATTENUATORRF Attenuat... |
32AS102-K20S3 | Rosenberger | 99.09 $ | 1000 | SMA ATTENUATORRF Attenuat... |
32AS102-K30S3 | Rosenberger | 99.09 $ | 1000 | SMA ATTENUATORRF Attenuat... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...