3360C-1-105LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers and Rheostats are used in many areas of engineering. One example of this is the 3360C-1-105LF. This part is a low-cost, non-contact, variable resistance element that can be used to provide a precise linear or logarithmic analogue voltage or resistance output.

The 3360C-1-105LF is most commonly found as a digital and analogue panel meter, but is also used in industrial and consumer applications. It is a single-turn, low-profile part with a 2.54 mm square mounting hole and a 12 mm metal shaft. The potentiometer has an operating temperature range of -20 to 85 degrees Celsius and is sealed with a glass-filled plastic housing.

The 3360C-1-105LF application field and working principle is to provide an adjustable, resistive voltage or resistance output. This output is usually connected to a comparator circuit or ADC or DAC converter. The input resistance of the potentiometer can be adjusted in a linear or logarithmic fashion. When connected to a voltage source, the output voltage is proportional to the input voltage and a set resistance, with the resistance adjustable by the knob or actuator on the pot.

The potentiometer is connected to one side of a voltage source, and the other side to ground. The wiper arm moves up or down the resistance track, to increase or decrease the resistance which is connected to the power supply. If the resistance is increased, the current passing through the circuit is decreased and vice versa, thus the voltage produced across the load decreases. This adjustable resistance output is then inputted to a comparator circuit or ADC or DAC converter to compare it to reference voltage to measure or compare information.

In the 3360C-1-105LF, the resistance track measures 5K ohms. The resistance is adjustable from 5k ohms to zero ohms and is packaged with a screwdriver adjustment knob. The potentiometer is also protected by a plastic cover and a seal to ensure against dust and moisture ingress. Due to its low profile of 4mm, this type of pot is ideal for applications where space is a premium.

The 3360C-1-105LF is an ideal choice for use in many industrial and consumer applications. Its low cost and single-turn knob makes it an attractive choice for many. It can be used in a wide variety of applications, such as motor speed control, level and light intensity control, sound volume control, and as an adjustable element in amplifier circuits.

Overall, the 3360C-1-105LF is a low-cost, non-contact, variable resistance element that is used in many areas of engineering. It is most commonly found as a digital and analogue panel meter but can also be used in industrial and consumer applications. The adjustable resistance provided by the potentiometer is ideal for applications such as motor speed control, level and light intensity control, sound volume control and as an adjustable element in amplifier circuits. It is a single-turn, low-profile part with a 2.54 mm square mounting hole and a 12 mm metal shaft. The resistance track measures 5k ohm which is adjustable from zero ohms to 5k ohms and is packaged with a screwdriver adjustment knob.

The specific data is subject to PDF, and the above content is for reference