345LB5C2457T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components that generate repeating, or periodic, electrical signals. They are commonly referred to as waveform generators and are used in a wide variety of applications such as testing, communications, and audio applications. One type of oscillator that is used in these applications is the 345LB5C2457T. This oscillator is an integrated circuit (IC) that is designed to generate a specific waveform at a particular frequency. In this article, we will discuss the application field and working principle of the 345LB5C2457T.

The 345LB5C2457T is designed to generate a band-limited square wave signal with adjustable duty cycle and frequency. The output signal can be a square wave, sine wave, triangle wave, or any combination thereof. The oscillator has an operating voltage range of 1.8 to 5.5 volts and a frequency range of 400 Hz to 4 MHz. It is typically used in test and measurement applications, such as spectrum analyzers, audio oscilloscopes, amplifiers, and waveform generators. The 345LB5C2457T is also used in industrial power supplies, control systems, and medical devices.

The working principle of the 345LB5C2457T is based on the charge pump technique. The oscillator consists of an input circuit, a frequency adjustment loop, and an output circuit. The input circuit of the oscillator contains a capacitor and resistor combination along with an input transistor. The resistor and capacitor form an RC circuit, which produces the desired frequency of the output signal. The adjustment loop contains an adjustable resistor that is used to adjust the frequency of the oscillator. The output circuit contains a level shifter, an output transistor, and an output filter.

The input signal is first filtered by the RC circuit, which removes any high-frequency noise. The output of the RC circuit is then applied to the input transistor, which amplifies the signal. The amplified signal is then applied to the adjustment loop, which adjusts the frequency of the signal. The adjusted signal is then sent to the level shifter, which converts the signal from high to low or vice versa. The converted signal is then passed through an output filter to remove any ripples or spikes in the signal and is finally applied to the output transistor, which amplifies the signal and sends it out. The output of the oscillator is determined by the frequency of the signal.

The 345LB5C2457T is a versatile oscillator that can be used in a wide variety of applications. It offers a wide range of adjustable frequencies, high output swing, and low start-up current. Its adjustable duty cycle and frequency makes it ideal for applications such as waveform generators, amplifiers, and control systems. With its robust design and low power consumption, the 345LB5C2457T is an ideal choice for applications requiring precision and reliability.

The specific data is subject to PDF, and the above content is for reference