34ASP21B1M6RT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Toggle Switches

Toggle switches are a type of electrical switch that are usually used to control and automate a wide variety of domestic and industrial applications. A toggle switch is triggered when a current is sent through it, causing an electrical connection to be formed between two circuits. This type of switch is made up of two parts: a base and a toggle lever. The base is the part that gets connected to an electrical circuit, and the toggle lever is the part that is pushed or pulled to open or close the connection between the two circuits.

34ASP21B1M6RT Toggle Switch

The 34ASP21B1M6RT toggle switch is a general-purpose switch designed for use in a variety of applications. It is an SPST (single-pole, single-throw) switch with an actuator. The switch has a maximum current rating of 4.5A and a maximum voltage rating of 28VDC. It also has a mounting hole diameter of 7.3mm and a panel cut-out of 18.1mm. To connect the switch to an electrical circuit, two wires need to be connected to the two terminals on its base.

Application Fields

The 34ASP21B1M6RT toggle switch can be used in a variety of applications, including lighting, automotive, industrial and commercial. It is commonly used in signal and power switching, as well as in HVAC systems and industrial process controls. It is also used in access control applications and in medical equipment, as well as in many other applications where reliable and precise switching is required.

Working Principle

The 34ASP21B1M6RT toggle switch is designed to be controlled manually. When the toggle lever is pushed or pulled, the contact between the two circuits is either opened or closed, allowing or cutting off the current flow. The toggle lever is then held in either the open or closed position, keeping the connection in that state until the lever is moved again. If the toggle switch is used in an application where the lever can be activated multiple times, the switch can be configured with a spring return mechanism, ensuring that is returns to its default position after each activation.

The specific data is subject to PDF, and the above content is for reference