352352-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane Connectors - Hard Metric, Standard, refer to the specific types of connectors that are designed for use in the connection of backplane systems. The 352352-1 is a Hard Metric, Standard backplane connector, suitable for use in a variety of applications. In this article we will discuss the application fields and working principle of the 352352-1 connector in detail.

The 352352-1 is a Hard Metric, Standard backplane connector that is based on standard metric sizing, as prescribed by the IEC 60130-9 series of standards. It is used in a variety of applications, from communication systems to industrial process control systems and even aerospace applications. The connector can be used in its standard fashion, for connecting a backplane system\'s power and signal signal lines, or it can be used for a wide range of applications in which it is necessary to provide additional device density.

The 352352-1 is designed to provide reliable signal transmission and low impedance. It has a 0.635 mm pitch and a 2.54 mm pitch – 8 mm pitch standardized package. It is fully compliant with IEC 61000-4-2 EMC requirements and is rated up to 500VAC, 20A. It is fully compatible with a wide range of board-to-board, cable-to-board and panel-to-board applications.

The 352352-1 connector uses a three-part design, with two outer contacts and one inner contact. The inner contact is used to transfer signals, while the outer contacts are used to provide power and ground connections. The connector has a plastic pin type and also a metal pin type. The plastic pins are used for lower power applications, while the metal pins are used for higher power applications. They provide reliable signal and power transfer.

The 352352-1 connector also has a unique locking mechanism that helps to ensure secure connections. The locking mechanism consists of a metal or plastic locking sleeve and a retaining clip. The locking sleeve fits over the outer contacts of the connector, providing a secure mechanical connection. The retaining clip then secures the locking sleeve to the connector, preventing accidental disconnects.

Overall, the 352352-1 is an excellent solution for backplane systems which require reliable signal transmission and/or additional device density. It is designed to provide reliable signal transmission and low impedance, with a unique locking mechanism to prevent accidental disconnects. The connector is fully compliant with IEC 61000-4-2 EMC requirements and is rated up to 500VAC, 20A. It is fully compatible with a wide range of board-to-board, cable-to-board and panel-to-board applications.

The specific data is subject to PDF, and the above content is for reference