353NB3A240R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical devices that generate a repetitive signal with a certain frequency, amplitude, and waveform at its output. The frequency of the signal is typically determined by an internal component that is mechanically or electronically adjusted. An oscillator can be used to convert a low-frequency signal into a higher frequency signal, which in turn can be used to carry information or create an image on a display. The 353NB3A240R oscillator is a small, low-cost, low-power frequency synthesizer that is often used in consumer audio and video products.

The 353NB3A240R consists of two integrated circuits: the main IC and a crystal oscillator. The main IC is an 8-bit microcontroller and contains a fractional-N frequency synthesizer, a phase-locked loop (PLL), and a multiplexer (MUX). The crystal oscillator serves as the reference frequency source for the PLL. The PLL locks to the reference frequency and then generates derivatives of the reference frequency based on the parameters set by the user.

The 353NB3A240R is ideal for applications requiring low-cost frequency synthesis. It can operate over a wide frequency range, from 4 kHz to 40 MHz, and is capable of producing frequencies with accuracies of 0.25 ppm at 25°C. The device has a wide input voltage range of 3 to 5 volts, and its low power consumption of 0.5 mW makes it well suited for portable applications. The combination of low price, low power consumption, and wide frequency range make the 353NB3A240R an attractive choice for a variety of applications.

The 353NB3A240R is primarily used for audio and video applications that require the generation of signals at different frequencies. Examples of such applications are television receivers, radio receivers, audio amplifiers, and digital cameras. It is also used for other applications such as frequency hopping and chip card access systems.

The 353NB3A240R oscillator has a number of advantages over traditional frequency synthesizers. It is faster and more accurate than other frequency synthesizers, and its low power consumption makes it ideal for portable applications. Additionally, the device has low jitter and phase noise, making it ideal for applications that require precise control of signal frequencies.

The working principle of the 353NB3A240R oscillator is based on the principle of phase locked loop (PLL). A PLL is a feedback controlling system that works to keep the output signal of the system in synchronism with the input signal. In a PLL system, an oscillator generates an output signal with a certain frequency and phase. The output of the oscillator is then compared to the input signal. If the phase or frequency of the input signal is not the same as the output signal, an error signal is generated and fed back to the oscillator to adjust the frequency and phase until the error is minimized.

The 353NB3A240R uses this concept to generate a reference signal from a crystal oscillator, which is then locked to the incoming signal using a phase-locked loop. Through the use of a fractional-N frequency synthesizer, the reference signal is then divided into multiple frequencies for use in different applications. The device is capable of generating frequencies from 4 kHz to 40 MHz with accuracies of 0.25 ppm at 25°C.

Overall, the 353NB3A240R oscillator is an ideal device for applications where low cost, low power consumption, wide frequency range and accurate control of signal frequencies are required. Its small size, low price, and simplified design make it an attractive choice for portable audio and video applications. With its accuracy and precision, the 353NB3A240R provides a reliable and robust solution for frequency synthesis needs.

The specific data is subject to PDF, and the above content is for reference