353SB5I320T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

353SB5I320T oscillators are often used in various types of electronic equipment for control signals and other uses. They offer a convenient way to produce an ac signal of desired frequency and amplitude range. Depending upon the application, selection of the oscillator may vary according to type, frequency, external components as well as other factors. A variety of configurations can be employed with the appropriate external circuitry to achieve the desired performance.

353SB5I320T Application Field and Working Principle

The 353SB5I320T oscillator is designed for use as a clock signal source in digital electronics. It produces a square wave output signal at its output terminal. This signal can be used to generate a clock signal, or can be used in other various applications such as oscillator designs for microcontrollers, analog to digital converters, pll circuits, frequency division applications, etc. The frequency of the output is determined by the combination of external components used for the oscillator.

The oscillator is also suitable for analog circuitry applications such as voltage-controlled oscillators (VCOs) and temperature compensation in power supplies. It works by measuring the electrical characteristics of an external component and adjusting the waveform accordingly. It produces a stable and reliable output signal .

This oscillator is composed of a gain element, an inverter, a buffer, a capacitor, and an oscillator core, as shown in Figure 1. The gain element amplifies the signal and the buffer converts it to a square wave. The capacitor provides negative feedback to the gain element so as to establish and maintain oscillation at a frequency determined by the characteristics of the external components.

Figure 1. 353SB5I320T Oscillator Configuration

The gain element of the oscillator is composed of an operational amplifier and a resistor network. The inverter takes the amplified and buffered signal and inverts it so that a positive and negative signal output is obtained. This signal is then passed through the capacitor which adjusts the frequency depending upon the characteristics of the external components.

The frequency of the output is determined by the combination of the gain element, buffer, capacitor and the oscillator core. Since the output signal is essentially a square wave, a frequency divider can be used to adjust the frequency of the output. The frequency of the output can be adjusted by varying the values of the external components.

The 353SB5I320T oscillator is a simple and cost-effective solution for applications requiring an oscillator with adjustable frequency. It offers a convenient way to generate an AC signal of desired frequency and amplitude range, and can be used for various applications including clock signals, analog and digital circuits, and temperature compensation.

The specific data is subject to PDF, and the above content is for reference