36022188 RF/IF and RFID

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to RFIs and EMI - Shielding and Absorbing Materials

Radio frequency interference (RFI) and electromagnetic interference (EMI) are forms of electromagnetic energy that interfere with electronic devices and can cause negative results. RFI is primarily caused by electrical or electronic devices that create radio frequency waves, while EMI is caused by a wide variety of sources such as electric motors, fluorescent lighting, and computer monitors, and is often referred to as radio frequency interference (RFI).RFI and EMI are a major source of interference that can interfere with the operation of many electronic devices. Shielding and absorbing materials are used to protect and reduce interference from external sources. This article will address 3602188 application field and working principle of shielding and absorbing materials used in reducing interference from RFI and EMI.

Types of Shielding and Absorbing Materials

There are two main types of shielding and absorbing materials that are used in RFI and EMI mitigation: metallic shielding and absorbing materials. Metallic shielding materials are typically thin sheets of metal which are designed to block, absorb, and redirect or reflect RF and EMI signals, while absorbing materials are designed to absorb or dampen the strength of a signal. Metallic shielding materials are often used when the maximum amount of filtering or shielding is desired. Common materials used in metallic shielding are aluminum, copper, and steel. Copper and aluminum are the most popular metals used in shielding, as they provide the highest degree of protection against RF and EMI emissions. Copper and aluminum have the added advantage of being relatively inexpensive and lightweight compared to steel. Absorbing materials are often used when it is not possible to use metallic shielding, such as when the transmission line could be blocked or distorted by the metallic shielding material. Common materials used in absorbing include foam, rubber, and plastic. Each of these materials has very different properties, and the selection of absorbing materials should be based upon the expected frequency differences of the RF and EMI emissions.

3602188 Application Field and Working Principle

3602188 shielding and absorbing materials are used in a wide variety of applications. Common uses of shielding and absorbing materials are for automotive applications, such as shielding the wire harnesses from RF and EMI emissions, and for military applications, such as reducing emissions in military combat vehicles. The working principle of shielding and absorbing materials is simple. Metallic shielding materials are designed to block, absorb, and reflect RF and EMI signals, while absorbing materials are designed to absorb or dampen the strength of a signal. This can be achieved through various mechanisms which include physical absorption of energy, induced electric fields, and capacitive coupling. Physical absorption of energy occurs when the shielding and absorbing materials absorb the energy of the RF and EMI signals, thus preventing it from being transmitted or conducted further. Induced electric fields are used in shielding and absorbing materials by creating a counter electric field which opposes the incoming RF and EMI signal. This causes the incoming signal to counteract the induced electric field and thus, shielding the area from any further interference. Capacitive coupling is also used in shielding and absorbing materials, in which the material acts as a capacitor, storing and releasing energy as waves pass through it. This helps to reduce the strength of the signal and thus, reducing interference.

Conclusion

In conclusion, shielding and absorbing materials are used in a wide variety of applications to reduce interference from RF and EMI sources. There are two main types of shielding and absorbing materials: metallic shielding materials, which are designed to block, absorb, and reflect RF and EMI signals, and absorbing materials, which are designed to absorb or dampen the strength of a signal. The 3602188 shielding and absorbing materials work by either absorbing energy, inducing electric fields, or capacitive coupling. Overall, shielding and absorbing materials are an effective means of reducing interference from RF and EMI sources, and are used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description