36ENG18-2115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel Indicators and Pilot Lights, such as the 36ENG18-2115, provide instant visual feedback of the operational state or machine control status for both on-site and remote personnel. This type of lighting device is typically composed of an illuminated lens and a variety of bases, which are designed to fit into large or small panels.

The 36ENG18-2115 is a universal panel indicator light, suitable for mounting in any panel in any orientation. This particular unit includes a 22mm diameter mounting hole, a single 10mm threaded mounting hole, and two 0.250” (6.35 mm) stud leads for connection. The lens is clear, the LED (Light-emitting diode) is green, and the operating voltage is 110 VAC.

Panel indicators and pilot light’s working principles are dependent upon the application and type of device. Common types are incandescent indicators, neon indicators, LED based indicators, flasher type indicators, and warning horns. In the case of the 36ENG18-2115, the LED light illuminates when current passes through it.

For applications where an audible tone is needed, such as machine control, a warning horn can be used in conjunction with the 36ENG18-2115 to provide an audible alarm when a certain event occurs or the machine is not operating correctly. The warning horn includes an audible indicator for various states such as ‘On’ or ‘Off’. The LED light is also used for control purposes, such as on/off indication or flashing.

Incandescent panel indicators, such as the 36ENG18-2115, offer a long service life. When in use, the filament in the bulb of the indicator will heat up and a current will pass through it. The filament will then emit visible light. The light will only be illuminated when current passes through the filament.

Neon indicators are typically used as a visual alarm or to indicate when a machine is not operating correctly. When current is applied to the indicator, a current will pass through the neon gas within the bulb, causing the gas to become heated and illuminated. The indicator will only be illuminated when current passes through it.

LED based indicators are becoming increasingly popular for many applications, and the 36ENG18-2115 is one such example. When current is applied to the indicator, the LED will emit light. LED based indicators last longer and use less energy than incandescent indicators.

Flasher type lights are often used to indicate when a machine is not functioning correctly. The indicator will flash on and off when current is applied to it. The flashing frequency can be varied to indicate different operating states.

Panel indicators and pilot lights are used for many industrial applications. The 36ENG18-2115 is a universal panel indicator light, suitable for any panel in any orientation. It includes a 22mm diameter mounting hole, a single 10mm threaded hole, and two 0.250” (6.35 mm) stud leads for connection. The lens is clear, the LED is green, and the operating voltage is 110 VAC. The light is illuminated when a current passes through it.

The specific data is subject to PDF, and the above content is for reference