3840-75

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors (RF) are electrical connectors used in radio frequency (RF) communications. A common type used in modern radio communications is the 3840-75. This type of RF connector is used for applications such as: antenna jacks, RF switches, RF amplifiers, microwave ovens, RF power dividers, and satellite dishes.

The 3840-75 connector uses a two-piece construction, with an outer sleeve and an inner sleeve. The two pieces are connected through two electrical contacts, one on each sleeve. The inner sleeve is made of a cell structure that is insulated with dielectric material, and the center conductor is surrounded by the outer sleeve. The inner sleeve and center conductor act as the antenna together, thereby providing the signal for the RF connector.

To ensure the best signal transmission for the 3840-75 connector, the electrical contact between the two sleeves needs to be clean and free from any dirt or corrosion. To do this, the contacts should be inspected regularly and cleaned with a lint-free cloth. Any debris that is found should be carefully removed from the contact area.

When it comes to use in applications, the 3840-75 connector has a wide range of uses. It can be used in RF applications such as: antenna systems, RF switches, rotary switches, and microwave ovens. It can also be used in other applications, such as: data communications, fiber optics, audio systems, and video systems.

The working principle of the 3840-75 connector depends on the design of the center conductor. This center conductor is designed to have an impedance that matches the impedance of the signal that is to be sent through it. In this way, the signal is carried from one end of the connector to the other with minimal loss of signal strength. The connector allows for transmission of signals over distances greater than that of non-coaxial connections.

The 3840-75 connector is a type of RF connector that is commonly used in radio frequency communications. It is useful for applications such as: antenna systems, RF switches, rotary switches, microwave ovens, and data communications. To ensure the best signal transmission, care should be taken to keep the electrical contacts clean and free from debris. The working principle of the connector relies on the center conductor, which is designed to have an impedance that matches the impedance of the signal that is to be sent through it.

The specific data is subject to PDF, and the above content is for reference