39600630440

Fuses are an important type of electrical and electronic components that are used in numerous electrical and electronic devices and installations to protect them from damage due to excessive current caused due to short-circuits or other faults in the system.

The 39600630440 fuse is a standard time-delay fuse that is typically employed in devices and installations where protection from overcurrent is needed. This fuse has a very low interior voltage rating of 125VAC and is designed to remain in its open state even under prolonged overloads. It is made to break the circuit when an overload reaches a predetermined current level and the time delay is needed to protect the electrical components against inrush current or momentary surges. This fuse is usually used in air conditioners, motors, compressors and other similar medium voltage appliances and machinery.

This type of fuse is basically a hermetically sealed container that holds two metal strips or wires together. One end is connected to the power source while the other end is connected to the appliance. The heat generated by the electric current passing through the wires causes the metal to expand and eventually melt, causing the current to be cut off. The time delay fuses come in different time delay ratings from 0.2 seconds to 10 seconds and their maximum current rating varies from 15A to 200A, depending on the model.

To ensure proper performance, the fuse must be matched with the current ratings of the device or appliance it is used with. For best results, it should also be chosen according to its interrupting capacity, which is the amount of current the fuse can handle before it opens up. This depends on the voltage and type of fuse. Other important factors that must be considered when selecting the right fuse are its operating temperature, ambient temperature, and environmental conditions, as these can affect its performance.

In conclusion, the 39600630440 fuse is designed for devices and installations that require protection from overcurrent. It is a time delay fuse with a very low interior voltage rating that is designed to remain in its open state even under long-term overloads. To ensure proper performance, this fuse needs to be selected according to its current ratings, interrupting capacity, operating temperature, ambient temperature and other environmental conditions.