3CA-PJ2(40)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Three-phase current monitoring relays (3CPJ2 (40)) belong to the miscellaneous category of monitoring devices. The device uses measurements of phase current to detect any abnormal currents, thus protecting equipment from electrical damage. 3CPJ2 devices are used to protect motors, generators, wind turbines, and power distribution lines from over-current scenarios, ensuring the safe operation of systems. Additionally, 3CPJ2 devices help to detect instabilities in the power supply grid, as well as preventing potential faults.

The 3CPJ2 device consists of a set of three current transformers (CTs) that are connected to the lines which need to be monitored. The CTs are connected to the cores of the 3CPJ2 relay. When the line is operating under normal conditions, the currents flowing through the lines will remain within acceptable parameters. However, when the current exceeds the set limit, the CTs will cause a change in the 3CPJ2 relay’s output, alerting the user of the issue.

The 3CPJ2 relay’s working principle is based on measuring the current through the lines, and comparing the measured value with the set value. If the measured value is higher than the set value, the relay will activate, displaying a warning sign. The 3CPJ2 device may be configured to activate either when the current is below the set value, or when the current is beyond a certain ratio of normal current. Additionally, the device may be configured to initiate several actions, including the activation of a device’s alarm system, the switching on of a warning light, and the shutdown of the equipment.

The 3CPJ2 device can be used in a wide range of applications, including power system protection, predictive maintenance, load-shedding applications, and fault location detection. The 3CPJ2 is most commonly used in motors, generators, and turbines, providing protection against overloads, shortage, under voltage, and phase reversal. The device ensures that the system runs smoothly and with maximal efficiency, while also helping to prevent potential electrical damage.

The 3CPJ2 device is also used in power distribution systems to detect any irregularities or abnormal currents caused by faulty wiring or other systemic issues. The 3CPJ2 can be used in conjunction with other monitoring devices, such as voltage, current, power, and frequency monitors, to minimize the chances of any damages to the system.

The 3CPJ2 is a versatile monitoring device that can be used to protect devices and systems from electrical damages. The device can detect any abnormalities in the current, thus ensuring the safety and efficiency of the system. Additionally, the 3CPJ2 helps to detect instabilities in the power supply grid, and can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference