3JQ 150-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses

3JQ 150-R Application Field and Working Principle

The 3JQ 150-R is a high current fuse designed to protect against electrical circuit damage due to overcurrent or short circuit conditions. Its common application fields are industrial, residential, and commercial buildings.

The 3JQ 150-R is made up of a metal tube that has been filled with a non-corrosive, heat-resistant powder. The powder is heated and then quenched, resulting in the formation of a brittle glass or ceramic material that is fused in the tube. This fused material is very important because it will conduct a current when it is energized, allowing the protection of the electrical circuit.

The working principle behind the 3JQ 150-R is based on three factors: the melting point of the fuse material, the current rating of the fuse, and the amount of time that the fuse can carry the rated current.

The melting point of the fuse material is determined by the manufacturer and is typically stated on the fuse itself. When the electrical current passing through the fuse is greater than the melting point, the fuse will begin to deform and the current will start to conduct through the metal tube, thus protecting the circuit from further damage.

The current rating of the fuse is also specified on the label and is based on the ability of the particular fuse to carry the rated current without bursting or melting. This current rating is a continuous rating, meaning that the fuse can carry the specified current for a short time without damage or failure.

Lastly, the amount of time that the fuse can carry the rated current is also important. This is referred to as the fusing time and is measured in seconds. The fusing time is important because it relates to the protection that the fuse provides. If the fusing time is too long, there is a risk of running too much current through the circuit and thus causing damage to the circuit or components.

In conclusion, the 3JQ 150-R is a high current fuse designed to protect against electrical circuit damage due to overcurrent or short circuit conditions. It is made up of a metal tube filled with a heat-resistant powder that will fuse when energized. The melting point, current rating, and fusing time of the fuse all factor into the protection it provides to the electrical circuit.

The specific data is subject to PDF, and the above content is for reference