3KBP06M-E4/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 3KBP06M-E4/51 bridge rectifier module is a three-phase bridge rectifier with a bridge of rated current 50A, insulated voltage 1000V, and surge current 270A. With a current ripple factor of less than 0.2%, this device is designed to provide high efficiency and power dissipation ratios with excellent heat conductivity. The 3KBP06M-E4/51 has a wide range of applications in three-phase rectification circuits and is suitable for applications ranging from power supply, UPS, electric welding machine, switch rectification and AC motor speed control.

Bridge rectifiers are electronic components which convert alternating current (AC) to direct current (DC). A bridge rectifier consists of four diodes arranged in a bridge configuration. The alternating current is applied across the bridge and the four diodes allow the current to flow in either direction, resulting in a unidirectional current output.

The 3KBP06M-E4/51 is a high efficiency module with a low voltage drop across the device. The device has an insulation rating of 1000V, meaning that it can withstand high voltages and temperature ranges. The device also has a large current rating of 50A with a surge current of 270A. This allows the rectifier to supply large amounts of current. The device also has a small current ripple factor of less than 0.2%, meaning that it is well suited for applications where low current ripple is a priority.

The 3KBP06M-E4/51 is widely used in applications such as power supply, UPS, electric welding machine, switch rectification, and AC motor speed control. One of the most common uses of this type of bridge rectifier is to provide high current output from a low voltage source. The rectifier is used in applications where low current ripple is necessary, such as in battery charging applications. The device is also commonly used in AC motor speed control systems, as it allows for accurate control over the motor speed.

The working principle of the 3KBP06M-E4/51 bridge rectifier is very simple. The alternating current is applied across the bridge consisting of four diodes. The diodes each have an anode and cathode, and current is allowed to flow through the diodes in either direction. This results in a unidirectional current output, allowing the device to convert AC to DC.

The 3KBP06M-E4/51 is a highly efficient bridge rectifier module with a wide range of applications. Its low voltage drop and high current rating make it ideal for applications where high current and low ripple is a priority. Its wide range of applications make it an ideal choice for a variety of rectification circuits and motor speed control applications.

The specific data is subject to PDF, and the above content is for reference