3M AB5010 4.13" X 9.25"-25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 3M AB5010 4.13" X 9.25"-25 is a RFI and EMI shielding and absorbing material. It is primarily used to reduce the amount of interference caused by radio frequency signals that could be detrimental to product performance and safety. This material is made from a combination of aluminum foil and thermoplastic resin, and features a combination of thin and thick layers to ensure maximum shielding performance.

The material used in the production of the 3M AB5010 4.13" X 9.25"-25 is designed to provide high resistance levels against the penetration of radio frequency signals. The thin layers of aluminum foil provide a shielding effect by reflecting away any RF signals that make contact with the material, while the thicker layers are designed to absorb the energy of the RF signal and dissipate it as heat. This ensures that any RF signals that make contact with the material will be greatly reduced in strength or even blocked entirely.

The performance of the 3M AB5010 4.13" X 9.25"-25 is highly dependent on the application in which it is used. The material is most effective when used in enclosed spaces such as cabinets, control panels, and other enclosed environments. In open environments such as outdoors, the effectiveness of the shielding material will be greatly reduced due to the increased exposure to RF signals. In order to maximize the shielding performance, it is important to properly install the 3M AB5010 shielding material and take into consideration factors such as the size of the enclosure, location of the material, and distance from potential sources of interference.

The 3M AB5010 shielding material is applied by separating the two thin layers with an adhesive or a foam tape, and pressing them together. The material can be applied directly onto a surface or onto a carrier material such as foam or plastic. The adhesive should be applied with care to ensure a secure bond and a uniform distribution of the shielding material across the entire surface.

The 3M AB5010 4.13" X 9.25"-25 is an excellent choice for applications that require reliable RFI and EMI shielding. It is designed to provide high resistance against radio frequency interference, allowing for reliable product performance and safety. When properly installed, the material is capable of reducing or eliminating RF interference and providing a stable environment for communication, data transfer, and other operations.

The specific data is subject to PDF, and the above content is for reference