Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RFI and EMI - Shielding and Absorbing Materials

3M AB5100HF 1.03" X 4"-10 is a high-efficiency filter designed to reduce the impact of radio frequency interference (RFI) and electromagnetic interference (EMI) in electrical systems. The filter has a steel casing, with two layers of permeable material, which help to absorb and disperse the interference in multiple directions, reducing the intensity of the signal reaching the system. It has a working voltage range of up to 10 kV and a working temperature range of -55°C to +125°C.

The AB5100HF 1.03" X 4"-10 is part of a wider series of shielding and absorbing materials from 3M, which help to reduce both RFI and EMI. These materials can be applied in various ways, including bonding shields, mylar, ferrite cores, and conductive shielding tape. They help to protect sensitive electronic equipment from static electricity and radio waves, reducing the chances of unwanted noise interference or overheating.

Applications of 3M AB5100HF 1.03" X 4"-10

The AB5100HF 1.03" X 4"-10 from 3M is designed specifically for applications such as broadcast, cellular, communications, instrumentation, medical and power, where sensitive equipment and components need to be protected from RFI and EMI. This filter is also suitable for use in areas where large amounts of electrical equipment is operating, where emissions from one device could interfere with another. ICT tests, magnetic-sensitive areas, and military systems are just some of the areas where this filter has been successfully used.

The filter is also suitable for use in hazardous area applications with stringent safety requirements, where additional grounding protection can be provided by a safety ground wire. This is particularly important during installation of certain components, such as fire and gas detection systems, where any extra protection is an essential precaution.

Working Principle of 3M AB5100HF 1.03" X 4"-10

The AB5100HF 1.03" X 4"-10 is designed to provide reliable shielding and absorbing material in order to reduce the impact of RFI and EMI. The filter is made up of two layers of permeable material, which absorb and disperse the interfering signal in multiple directions, providing efficient protection for sensitive equipment and components.

The filter also has a steel casing, which helps to disperse the additional interference generated by the filter as it starts to work. The internal components may also provide additional protection, as some are designed to reduce the reflection of the incoming signal, reducing the intensity further.

The AB5100HF 1.03" X 4"-10 is designed to provide the best possible protection to electrical equipment by helping to dissipate the electrical or magnetic energy which is generated by the interference. This ensures that the equipment remains protected, and that the correct signal is received with minimal interference.

Conclusion

The 3M AB5100HF 1.03" X 4"-10 filter provides reliable protection for sensitive electronic equipment, helping to reduce the impact of radio frequency interference (RFI) and electromagnetic interference (EMI). The filter is designed to provide efficient shielding and absorbing materials, in order to reduce the intensity of any incoming signals, and providing superior protection for equipment in hazardous areas.

The specific data is subject to PDF, and the above content is for reference