3N246

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components which allow the flow of current in one direction only, and bridge rectifier diodes are a particular type of diode used to rectify alternating current (AC) into direct current (DC). The 3N246 bridge rectifier is a small bridge rectifier which is widely used in many electronic systems.

The 3N246 bridge rectifier is a four terminal device, with two anodes, two cathodes and a centre-tap connection, which allows it to take an AC input voltage and convert it into DC output. The device works by forming a bridge circuit consisting of four reverse-blocking diodes. This is an arrangement whereby the current flows in one direction through the two anodes and two cathodes but is blocked in the opposite direction. The centre-tap connection provides a common reference point between the two halves of the bridge for the incoming AC current. When AC voltage is applied, the diodes will alternately block and unblock, turning on and off, which results in halves of the bridge being connected from the anode on one side to the anode and cathode on the other side.

The 3N246 bridge rectifier is typically used in many electronic circuits where a need for a compact, highly efficient and reliable source of DC power arises. These include stabilizers and switch-mode power supplies, audio frequency amplifiers and laser driver circuits. As the diodes employed by the device have high switching speeds, it makes them suitable for high-frequency operation. The 3N246 bridge rectifier can also be used in many different types of rectifier circuits, such as half-wave and full-wave rectifier circuits.

The working principle of the 3N246 bridge rectifier is simple and straightforward. When AC is applied to the input terminals, the diodes will block and unblock in pairs, alternating between open and closed states. This causes current to flow in only one direction and blocks it in the opposite direction. This results in current being output from the two anodes outputting DC voltage, while the two cathodes outputting the inverted form of the input voltage.

The bridge rectifier is a highly efficient type of rectifier circuit which is capable of providing the highest quality of rectified output voltage possible. It offers improved performance over other types of rectifier circuits, in particular when it comes to reducing the losses incurred in the rectification process. The 3N246 bridge rectifier is a particularly popular choice of rectifier circuits due to its small size, relatively low cost and ease of use.

The specific data is subject to PDF, and the above content is for reference