3PH6P18MM

3PH6P18MM is a type of transformer electrical accessories with 3 phase, 6 line and 18 MM as its specifications. It usually works as an accessory for large current transformers, allowing them to meet their mission of measuring, controlling and protecting against high power and large current electrical equipment, both indoor and outdoor. The working principle of 3PH6P18MM consists of two main parts: the core and the winding.

The Core of 3PH6P18MM

The core of 3PH6P18MM is used to store the magnetic energy which generated by horseshoe shape steel plates. It is made up of several pieces of laminations stacked together and held in place by steel clamps. The core is built to withstand a wide range of voltages and currents and it is made from superior quality steels meant to enduring such hazardous environmental conditions.

The Winding of 3PH6P18MM

The winding of 3PH6P18MM refers to the copper wire wrapped around the core to complete the electrical circuit. The copper wire used for winding can be either bare copper or insulated copper. The copper wires are wound around the core in a specific way depending on the purpose of the transformer and the required output current and voltage. It is also meant to make sure that the current that flows in and out of the transformer is equal. The wire used is thick enough to conduct a large current, which is needed by the transformer.

Application Field of 3PH6P18MM

3PH6P18MM is mainly used to supply large and powerful currents for large industrial applications such as generator sets, electric motors, and industrial machinery. It is also used to measure, control and protect against large amounts of electric power and current used in these kinds of industrial applications. 3PH6P18MM can be used both indoor and outdoor, as long as it is properly installed and grounded. It is also used in residential building applications to provide regulated power and to monitor the current.

Working Principle of 3PH6P18MM

3PH6P18MM works on the mutual induction principle, meaning that when an alternating electric field is created within its core, due to the presence of windings, an electric current will be induced in the same windings or in the electric circuit connected to it. When electric current flows through the electric circuit, it will create an alternating electric and magnetic field inside the core and the electric field would be shifted in attractive and repulsive directions. This causes a reverse electric current and the two windings are said to be “coupled” in order to manage electric fields created by the electric and magnetic fields respectively. The direction of the current established by this process is always reverse in both windings, which together is called “mutual induction”. This allows 3PH6P18MM to be used to regulate, measure and protect powerful and large electric currents.

In conclusion, 3PH6P18MM is an electrical transformer accessory with a core, a winding and the mutual induction principle to measure, control and protect against powerful and large electric currents for various industrial and residential applications. The core and winding of 3PH6P18MM allows it to provide a regulated power in a safe and efficient way, making it an ideal accessory for all kinds of electrical applications.