Allicdata Part #: | 4-1616308-4-ND |
Manufacturer Part#: |
4-1616308-4 |
Price: | $ 7.62 |
Product Category: | Uncategorized |
Manufacturer: | TE Connectivity Aerospace, Defense and Marine |
Short Description: | 43243010=BASE ASSY |
More Detail: | N/A |
DataSheet: | 4-1616308-4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 6.93000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 4-1616308-4 is an advanced piece of mechanical engineering equipment designed for water-cooled condensing and gas cleaning applications. These applications require specialised equipment to ensure the best results are obtained. The 4-1616308-4 is highly efficient, able to operate at a lower temperature and pressure than some other condensing systems. There are a number of potential benefits to be gained from using this system.
The main application field of the 4-1616308-4 is for cooling water in industrial processes. This is due to the design, which uses finned tubing to condense water vapour. The finned tubing is designed to dissipate heat faster than air, making the system much more efficient. The 4-1616308-4 is also used to cool gases, such as carbon dioxide, ammonia, and water vapour, in industrial applications. It is particularly useful for those processes that generate high volumes of gases, such as chemical and paper manufacturing plants.
The 4-1616308-4 works on the principle of heat exchange. Heat exchange occurs when heat is transferred from one material to another. In the case of the 4-1616308-4, a hot gas is diverted from an original source and then sent to a cooler material, such as finned tubing. Here, the heat is transferred, which in turn causes the condensation of the cooled gas. The condensed and cooled gas is then sent back to its original source, completing the cycle.
The effectiveness of the 4-1616308-4 depends greatly on the quality of the finned tubing used in its construction. The finned tubing should have a large surface area, as it is responsible for dissipating heat quickly. The finned tubing also needs to be constructed from materials that are resistant to corrosion, as some of the gases used in the process are corrosive. The tubing should also have a good thermal conductivity, so that it efficiently transfers the heat from the original source to the cooler material.
Another factor to consider when assessing the effectiveness of the 4-1616308-4 is the ambient temperature. If the temperature is too high, the efficiency of the unit will be reduced as the heat exchange rate decreases. However, if the temperature is too low, the unit\'s effectiveness may be improved as it will be able to cool gases to a greater extent.
In conclusion, the 4-1616308-4 is a powerful piece of engineering equipment that has numerous beneficial applications for water-cooled condensing and gas cleaning. It is an effective and reliable way of cooling gases and can have an impressive heat exchange rate, provided the finned tubing is of sufficient size and quality. The key to successfully utilising the 4-1616308-4 is to ensure that the ambient temperature is at the right level for the task.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE