4-1879062-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors, also known as electrolytic capacitors, are energy storage devices that store electricity and then release it when the voltage drops below a certain value. A tantalum capacitor is a capacitor that is made up of two different materials, usually two conductive metals, which are arranged in layers to form a kind of sandwich. One layer is an oxide film, called a “dielectric”, which separates the two conductive layers. The other layer is a conductive electrolyte, called an “electrolyte”, which carries the current through the capacitor. The combination of these two layers creates a capacitance, measured in Farads.

The 4-1879062-7 application field and working principle of tantalum capacitors are fairly simple. A tantalum capacitor can be used to store or buffer energy, usually from a power source or battery. When the voltage of the power source drops below the set rating of the capacitor, the capacitor will release its stored energy and thus act as an energy buffer. This exchange of energy can occur quickly – often within microseconds – allowing for rapid changes in the output voltage of the power source.

The 4-1879062-7 application field and working principle of a tantalum capacitor also includes the ability to act as a filter. A filter is a device which allows only desired electrical currents to pass through while blocking any unwanted signals or noise. By passing an alternating current through a tantalum capacitor, it will act as a low-pass filter, allowing only low-frequency signals to pass through and blocking out high-frequency noise. This makes it useful for audio and video applications where clean signals with minimal noise are desired.

The 4-1879062-7 application field and working principle also includes its use as part of a charge pump. A charge pump is an electronic device that converts AC power into DC power. Tantalum capacitors are essential components of some charge pumps, as they are used to store and transfer energy in between the AC and DC stages. This type of capacitor can also be used to regulate the voltage in a circuit, by helping to absorb the spikes and dips caused by changing loads.

Finally, the 4-1879062-7 application field and working principle include the ability to be used in power supplies and switching circuits. In these applications, a tantalum capacitor is used to reduce the amount of ripple voltage and to maintain a more steady voltage supply. By providing a low-impedance source of energy storage, a tantalum capacitor can also help to reduce the amount of energy that is dissipated by the circuit, as well as increasing the efficiency of the power supply.

In conclusion, the 4-1879062-7 application field and working principle of a tantalum capacitor include the ability to store and supply energy when a power source drops below a certain voltage level, act as a filter to eliminate unwanted noise, and as a component in charge pumps and switching circuits. As such, tantalum capacitors have a wide range of uses, from commercial and industrial applications, to consumer electronics.

The specific data is subject to PDF, and the above content is for reference