407F35D008M0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals:

Crystals are materials that form regular, orderly, symmetrical arrays when the atoms, ions or molecules are combined in a crystalline lattice. They are usually composed of two or more elements and arranged in a three-dimensional repeating pattern, known as a crystal lattice structure. Crystals can also be single atoms or molecules, as in diamond or graphite.

407F35D008M000, also known as a 4.7pF 500V ceramic disc capacitor, is a type of crystal that is commonly used in many electronics applications. It has a dielectric of ceramic and is typically configured in an axial or radial lead format. It is most commonly used in applications where a large capacitance and a high voltage rating are required.

The application field of the 407F35D008M000 is mainly in the analog circuitry which is needed in the audio equipment and radio, and the storage of electricity. It can also be used in other special equipment, for example, for measuring, automated control, and power supply.

The primary purpose of the 407F35D008M000 is to store energy when the applied voltage is at its peak. In other words, the capacitor absorbs the energy during the time that it was charged and releases it when the voltage is low. The capacitor can also be used to filter and reduce the noise of an AC source, by allowing the AC current to pass through the device and blocking the DC current.

The working principle of the 407F35D008M000 is essentially the same as any capacitor. Basically, when the capacitance of the device is increased, it allows charge to accumulate on each of its metal plates. As the accumulated charge increases, it stores potential energy and causes the capacitor to become charged. The charged capacitor can then act as a conductor or a resistor depending on the application.

In terms of its working principle, the 407F35D008M000 acts as a dielectric material between its two plates. This material has the ability to store and release energy when a voltage is applied across it. When a voltage is applied, the electrons flow through the capacitor and the internal capacitance is increased. This allows the capacitor to increase its capacitance, which in turn increases the amount of energy it can store.

The 407F35D008M000 is capable of accepting both AC and DC signals, which makes it a highly versatile component in many electronics circuits. When AC signals are present, the capacitor can provide a low impedance path for the AC current, allowing it to pass through the device with minimal distortion. When DC signals are present, the capacitor acts as a filter and blocks the DC current from passing through, allowing the desired AC signal to pass unimpeded.

The 407F35D008M000 is a highly functional capacitor that can be used in a variety of applications. It has the capability to store and release energy, filter AC and DC signals, and provide low impedance paths for AC signals. This makes it an essential component in many electronics circuits.

The specific data is subject to PDF, and the above content is for reference