Allicdata Part #: | 40F25KE-ND |
Manufacturer Part#: |
40F25KE |
Price: | $ 0.86 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 25K OHM 10W 1% AXIAL |
More Detail: | 25 kOhms ±1% 10W Through Hole Resistor Axial Wire... |
DataSheet: | 40F25KE Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.77760 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 25 kOhms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.406" Dia x 1.902" L (10.30mm x 48.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are commonly used in electronic circuit components and can be found in a variety of different sizes and shapes. The 40F25KE is one such through hole resistor. This article will focus on the application field and working principle of the 40F25KE.
Introduction to the 40F25KE
The 40F25KE is a through-hole resistor commonly used in electronic components. It provides excellent electrical insulation and minimal interference with other parts of the circuitry. The 40F25KE has a power rating of 25 watts, a maximum frequency of 7 MHZ, and a maximum voltage of 600 volts. It also has a temperature range of -65 to +125 Celsius.
Application Field
The 40F25KE is primarily used as a heat-resistant resistor. It is ideal for applications where a high thermal stability and a long lifetime are needed. This type of resistor is often used for temperature-oxidative stability and high power resistor-based resistors, such as computer memory, integrated circuit drivers, power supplies, and other circuits that require constant voltage and current. Other applications include for impedance mixing, switch contact protection, distributed capacitance, and more.
Working Principle
The working principle of the 40F25KE is based on electrical resistance. A resistor is an electrical component that creates a resistance to the flow of electricity. If the resistance is too high the current will not flow and if it is too low the current will flow too quickly. The 40F25KE is designed to have a resistance that is just right so that it can provide the needed voltage and current for the application.
The 40F25KE works by adjusting the electrical resistance between different wire paths. This is done by creating an electrical barrier between different copper pathways. This barrier prevents electrical current from moving from one wire to another. In other words, the 40F25KE creates an electrical resistance that allows only the desired amount of electricity to pass through the circuit. The resistance of the 40F25KE can be changed depending on the wattage and maximum voltage of the application.
Conclusion
The 40F25KE is a through-hole resistor suitable for applications where high thermal stability and long life is required. Its working principle is based on electrical resistance and by adjusting the electrical resistance between different wire paths it can provide the required voltage and current for the application. The 40F25KE is commonly used in electronic components and provides excellent electrical insulation and minimal interference.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
40F20KE | Ohmite | 0.86 $ | 1000 | RES 20K OHM 10W 1% AXIAL2... |
40F22KE | Ohmite | 0.86 $ | 1000 | RES 22K OHM 10W 1% AXIAL2... |
40F25KE | Ohmite | 0.86 $ | 1000 | RES 25K OHM 10W 1% AXIAL2... |
40F2R0E | Ohmite | 1.0 $ | 1000 | RES 2 OHM 10W 1% AXIAL2 O... |
40F200E | Ohmite | 0.66 $ | 1000 | RES 200 OHM 10W 1% AXIAL2... |
40F20RE | Ohmite | 0.66 $ | 1000 | RES 20 OHM 10W 1% AXIAL20... |
40F220E | Ohmite | 0.66 $ | 1000 | RES 220 OHM 10W 1% AXIAL2... |
40F225E | Ohmite | 0.66 $ | 1000 | RES 225 OHM 10W 1% AXIAL2... |
40F250E | Ohmite | 0.66 $ | 1000 | RES 250 OHM 10W 1% AXIAL2... |
40F25RE | Ohmite | 0.66 $ | 1000 | RES 25 OHM 10W 1% AXIAL25... |
40F270E | Ohmite | 0.66 $ | 1000 | RES 270 OHM 10W 1% AXIAL2... |
40F27RE | Ohmite | 0.66 $ | 1000 | RES 27 OHM 10W 1% AXIAL27... |
40F2K0E | Ohmite | 0.7 $ | 1000 | RES 2K OHM 10W 1% AXIAL2 ... |
40F2K2E | Ohmite | 0.7 $ | 1000 | RES 2.2K OHM 10W 1% AXIAL... |
40F2K5E | Ohmite | 0.7 $ | 1000 | RES 2.5K OHM 10W 1% AXIAL... |
40F2K7E | Ohmite | 0.7 $ | 1000 | RES 2.7K OHM 10W 1% AXIAL... |
40F200 | Ohmite | 0.71 $ | 1000 | RES 200 OHM 10W 1% AXIAL2... |
40F20R | Ohmite | 0.73 $ | 1000 | RES 20 OHM 10W 1% AXIAL20... |
40F2K0 | Ohmite | 0.76 $ | 1000 | RES 2K OHM 10W 1% AXIAL2 ... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...