Allicdata Part #: | 40F600-ND |
Manufacturer Part#: |
40F600 |
Price: | $ 0.75 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 600 OHM 10W 1% AXIAL |
More Detail: | 600 Ohms ±1% 10W Through Hole Resistor Axial Wire... |
DataSheet: | 40F600 Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.68040 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 600 Ohms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.406" Dia x 1.902" L (10.30mm x 48.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are the most popular type of resistor. With its simple construction and ease of use, it is the preferred choice among both professionals and hobbyists alike. The 40F600 Through Hole Resistor is no different. This resistor is designed to be utilized in high-current applications and can support currents of up to 600 amps. In addition to its capability to handle high currents, it also features a low resistance value of 40 ohms.
The 40F600 is constructed using a ceramic plate over an insulated substrate, which is then encased in a plastic housing. This provides a strong and reliable construction that is resistant to vibration and shock. In addition, the ceramic plate has been engineered to dissipate heat more efficiently than regular resistors, making it ideal for applications exposed to high temperature environments.
One of the major benefits of the 40F600 is its low inductance value. The low inductance allows the resistor to be used in high frequency circuits without compromising the circuit\'s performance. Additionally, due to its wide resistance range, the resistor allows users to select the exact resistance value needed for the specific application.
The 40F600 Through Hole Resistor is well suited for applications in the consumer, industrial, automotive, and military industries. It can be used in high-power circuits, such as electric motors and automotive systems, as well as for low-power applications, such as LED drivers and switching power supplies. In addition, its wide resistance range and low inductance value make it a great choice for high-frequency circuits, such as radio receivers and audio amplifiers.
The 40F600 Through Hole Resistor\'s mode of operation is based on Ohm\'s law, which states that the current flowing through a circuit is proportional to the voltage applied across it. This means that when a specific voltage is applied across the 40F600, the current flowing through it will be limited to a certain value. As the resistance value is inversely proportional to the current, the lower the resistance of the 40F600, the higher the current that can be handled.
The 40F600 Through Hole Resistor is an excellent choice for high current applications. Its high temperature performance, low inductance value, and wide range of resistance values make it suitable for a wide variety of applications. Moreover, its ease of installation and simple construction make it the ideal choice for both professionals and hobbyists.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SAF-XC2236N-40F66L AB | Infineon Tec... | 0.0 $ | 1000 | IC MCU 32BIT 320KB FLASH ... |
40F600 | Ohmite | 0.75 $ | 1000 | RES 600 OHM 10W 1% AXIAL6... |
40F62RE | Ohmite | 0.66 $ | 1000 | RES 62 OHM 10W 1% AXIAL62... |
40F68RE | Ohmite | 0.66 $ | 1000 | RES 68 OHM 10W 1% AXIAL68... |
40F600E | Ohmite | 0.69 $ | 1000 | RES 600 OHM 10W 1% AXIAL6... |
40F680E | Ohmite | 0.69 $ | 1000 | RES 680 OHM 10W 1% AXIAL6... |
40F6K0E | Ohmite | 0.71 $ | 1000 | RES 6K OHM 10W 1% AXIAL6 ... |
40F6K8E | Ohmite | 0.71 $ | 1000 | RES 6.8K OHM 10W 1% AXIAL... |
40F62R | Ohmite | 0.73 $ | 1000 | RES 62 OHM 10W 1% AXIAL62... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...