Allicdata Part #: | 40F900E-ND |
Manufacturer Part#: |
40F900E |
Price: | $ 0.69 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 900 OHM 10W 1% AXIAL |
More Detail: | 900 Ohms ±1% 10W Through Hole Resistor Axial Wire... |
DataSheet: | 40F900E Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.62370 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 900 Ohms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.406" Dia x 1.902" L (10.30mm x 48.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors have been used since the early days of electronics to control current, divide voltages, and set the input impedances of amplifier circuit. The 40F900E is a classic through-hole resistor component which features a leaded package that is flanked by two terminals. The 40F900E does not require its own dedicated printed circuit board, as it instead uses two leaded connections directly soldered onto the main circuit board.
The 40F900E exhibits very low internal resistance compared to traditional resistors, and can be used as a replacement for many of the higher-end resistive components used in higher-amperage applications. As such, the 40F900E is ideal for use in low-amperage applications, such as consumer electronics. It also features a maximum operating temperature of 200 degrees Celsius.
The 40F900E is an inherently low-resistance resistor, with a maximum resistance of 0.1 ohms. It is capable of dealing with high currents up to 1000 Amperes, while at the same time offering very low dissipation of heat. This is due to the use of a special manufacturing technique which is used to optimize the thermal behavior of the component.
The working principle of the 40F900E is simple. When a voltage differential is applied across the terminals, current will flow through the circuit, and a voltage drop will be present across the terminals of the resistor, creating a voltage potential across the component. This voltage potential creates a resistive force which opposes the flow of current, allowing the current to be regulated. The greater the voltage differential, the greater the amount of current that will be regulated.
The 40F900E is used to regulate current in a variety of electronic components, and can be used in a variety of applications. It has the ability to regulate the flow of current in a wide range of circuits, from basic low-impedance circuits to high-impedance circuits. It is also used to regulate current in audio systems, light dimmer circuits, feedback control systems, and also for protection from over-voltage in high-power switching supplies.
The 40F900E is an ideal choice for many applications due to its resistance and durability. It is highly resistant to aging, and can withstand high temperature and stress levels without experiencing failure. Additionally, it is very low in price compared to other resistive components, making it a popular choice for many circuits.
The 40F900E is a classic through-hole resistor component which is used in a variety of applications. It has the ability to regulate current in a wide range of circuits, is highly resistant to aging, and has a maximum operating temperature of 200 degrees Celsius. The 40F900E is an excellent choice for all of your resistor needs, providing reliable current regulation and dependable performance throughout the life of the component.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LMR040-1000-40F9-10100TW | Cree Inc. | 38.78 $ | 1000 | LED MOD LMR4 WRM WHT 1000... |
LMR040-0700-40F9-20100TW | Cree Inc. | 47.77 $ | 1000 | LED MOD LMR4 230V 700LM W... |
LMH060-2000-40F9-20200TW | Cree Inc. | 119.83 $ | 1000 | LED MOD 2000LM 4000K 230V... |
LMH060-2000-40F9-20300TW | Cree Inc. | 119.83 $ | 1000 | LED MOD 2000LM 4000K 230V... |
LMH060-2900-40F9-20200TW | Cree Inc. | 151.19 $ | 1000 | LED MOD 2900LM 4000K 230V... |
LMH060-2900-40F9-20300TW | Cree Inc. | 151.19 $ | 1000 | LED MOD 2900LM 4000K 230V... |
LMR040-0700-40F9-10100TW | Cree Inc. | 36.89 $ | 1000 | LED MOD LMR4 120V 700LM W... |
LMR020-0650-40F9-20100TW | Cree Inc. | 34.13 $ | 21 | LED MOD LMR2 NRTL WHT 650... |
LMR020-0650-40F9-10100TW | Cree Inc. | 34.13 $ | 11 | LED MOD LMR2 NRTL WHT 650... |
LMR040-1000-40F9-20100TW | Cree Inc. | 49.73 $ | 8 | LED MOD LMR4 WRM WHT 1000... |
40F900E | Ohmite | 0.69 $ | 1000 | RES 900 OHM 10W 1% AXIAL9... |
40F9K0E | Ohmite | 0.71 $ | 1000 | RES 9K OHM 10W 1% AXIAL9 ... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...