Allicdata Part #: | 40FR50-ND |
Manufacturer Part#: |
40FR50 |
Price: | $ 1.13 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 0.5 OHM 10W 1% AXIAL |
More Detail: | 500 mOhms ±1% 10W Through Hole Resistor Axial Wir... |
DataSheet: | 40FR50 Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 1.02240 |
Series: | Ohmicone® 40 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 500 mOhms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±90ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.406" Dia x 1.902" L (10.30mm x 48.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are electronic components used for controlling current and voltage levels in an electrical circuit. The 40FR50 is a kind of through hole resistor that is ideal for use in applications that require high power and very low output resistance. This type of resistor is the most commonly used resistor in power applications and is particularly popular in the field of analog circuits.
A 40FR50 through hole resistor can with stand a maximum power of 40 watts and has an output resistance of 5 ohms. This type of resistor is usually made with a metal oxide film or a metal-oxide-semiconductor (MOS) material. It is made up of two metal areas separated by an insulating material or diode. During operation, the diode and the metal areas form two resistors connected in series. The combined resistance from these two resistors is measured in ohms.
The 40FR50 through hole resistor works by allowing a current to flow between two metal electrodes. When a current is supplied, the metal oxide film or MOS material restricts the flow of current, thus limiting its magnitude. The output resistance is then determined by the size of the oxide film or material used and the current supply. The larger the oxide film or material used, the greater the output resistance.
The 40FR50 through hole resistor is ideal for use in applications that require high power and very low output resistance. This type of resistor is the most commonly used resistor in power applications and is particularly popular in the field of analog circuits. It is also widely used in applications where voltage or current levels must be kept in balance, such as in linear circuits. Additionally, these resistors are often used in pulse circuits that require pulse shaping for greater control.
In addition to its applications in power and analog circuits, the 40FR50 through hole resistor is also used in power management systems. It can be used to regulate the output current of a system, preventing it from reaching dangerously high levels. It can also be used to control the frequency of signals, resulting in more accurate waveforms. Additionally, it can be used to reduce electrical noise, improving system performance.
The 40FR50 through hole resistor is a highly reliable and versatile component that is ideal for use in a variety of applications. It is suitable for use in circuits that require high power and low output resistance. It is also ideal for use in power management systems and pulse circuits that require pulse shaping for greater control. The 40FR50 is an easy-to-use and cost-effective solution for a wide range of electronic systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
46739-40FR | ITT Cannon, ... | 13.34 $ | 1000 | GSKT CIR40 REAR PANEL FR |
40FR40 | Ohmite | 1.13 $ | 1000 | RES 0.4 OHM 10W 1% AXIAL4... |
40FR20 | Ohmite | 1.13 $ | 1000 | RES 0.2 OHM 10W 1% AXIAL2... |
40FR50 | Ohmite | 1.13 $ | 1000 | RES 0.5 OHM 10W 1% AXIAL5... |
40FR75 | Ohmite | 1.13 $ | 1000 | RES 0.75 OHM 10W 1% AXIAL... |
40FR10E | Ohmite | 1.03 $ | 1000 | RES 0.1 OHM 10W 1% AXIAL1... |
40FR15E | Ohmite | 1.03 $ | 1000 | RES 0.15 OHM 10W 1% AXIAL... |
40FR20E | Ohmite | 1.03 $ | 1000 | RES 0.2 OHM 10W 1% AXIAL2... |
40FR30E | Ohmite | 1.03 $ | 1000 | RES 0.3 OHM 10W 1% AXIAL3... |
40FR40E | Ohmite | 1.03 $ | 1000 | RES 0.4 OHM 10W 1% AXIAL4... |
40FR50E | Ohmite | 1.03 $ | 1000 | RES 0.5 OHM 10W 1% AXIAL5... |
40FR75E | Ohmite | 1.03 $ | 1000 | RES 0.75 OHM 10W 1% AXIAL... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...